Axis 231D Instruções do produto - Página 12

Procurar online ou descarregar pdf Instruções do produto para Câmara de segurança Axis 231D. Axis 231D 14 páginas. Axis 231d+: connection guide
Também para Axis 231D: Manual de ligação (1 páginas)

Imprimir página

INSTALLING THE HOUSING ASSEMBLY:

Be sure the bracket is properly and securely

mounted to a supporting structure capable of rigidly

holding the weight of the entire unit.

NOTE: This unit is designed for operation in an

upright position. Installing the product upside

down may cause damage to the internal

equipment, and will void the warranty.

1. This unit includes a 1½" NPT housing for a standard 1½"

NPT pipe. The housing can be used with other brackets

designed with 1½" male pipe threads, such as the UNI-WMB1

wall mount brackets.

2. Attach the housing coupling (Figure 3).

NOTE: Pipe threads should be clean and rust free.

Use the Teflon

™

the housing on the threads.

Figure 3

3. Mount the housing assembly to the mounting bracket

and housing coupling. A safety cable is included with

the housing to temporarily hold it while making wiring

connections. Loop the safety cable over one of the set

screws on the housing coupling and make the appropriate

connections using the (2) screw-down connectors supplied.

2. Undo the safety cable and twist the housing onto the

housing coupling. Secure all (3) setscrews provided on the

housing coupling (Figure 4).

Set screws

Figure 4

tape included with

Add thread

sealing tape

REMOVING AND ATTACHING THE DOME ASSEMBLY:

1. Attach the dome assembly to the housing top by lining

up the three pins with the three keyhole slots. Insert the

dome assembly into the housing and then rotate the dome

assembly clockwise. Then tighten the (3) screws on the front

of the dome assembly.

2. Remove the protective

film from the dome.

3. Clean the outside of

the dome.

Chart A Wiring Color Code

Power and Control Inputs

(Outside of housing)

POWER

Camera Power (24 VAC)

Accessory Power (24 VAC)

Separate Power Supplies for Camera and Accessory Power

Camera:

25 watts (VA), 24 VAC, Class 2 Only

Accessory: 27 wattts (VA), 24 VAC, Class 2 Only

CONTROL

RJ45 Ethernet Connector

ALARMS

Alarm 1

Alarm 2

Alarm 3

Common

- 1 -

Red

Orange

Yellow

Green

Blue

Violet

Gray

White