dibea D500 Pro Manual de instruções - Página 7
Procurar online ou descarregar pdf Manual de instruções para Aspirador de pó dibea D500 Pro. dibea D500 Pro 9 páginas. Robot vacuum cleaner
Imprimir página
Product Operation
Power connection.
After the charging base is powered on, the
indicator light shows "red".
2
Open the host
Turn on the side power switch. "I" means power on
and "O" means power off.
It is recommended not to shut down the host after it
finishes working. Keep the host in the charging state
so that it can work better next time.
Host charging
3
Put the host into the charging base, and pay
attention to align with the charging pole piece or
automatic recharging, as shown in figure a.
Or take the power adapter charging plug to directly
insert it into the host charging port, as shown in
figure b.
Do not install water tank and mop cloth when the
host is being charged.
For the first time, please fully charge it before use.
Notice:
If the machine is being charged, the indicator light of the (START) key will flash.
If the charging is completed, the indicator light of the key START will turn green.
If the power is insufficient in standby mode, the indicator light of the (START) key will
turn red, and the machine will broadcast the voice "please charge". The machine will not
automatically look for a charging base for charging.
If the power is insufficient in working mode, the indicator light of the (START) key will turn
green, and the machine will broadcast the voice "please charge". The machine will not
automatically look for a charging base for charging.
a
b
10
Product Operation
Effective method to extend battery life
Please charge the machine for 5 hours before use for the first time.
When the power is insufficient, please charge as soon as possible.
When the cleaning is finished or the power is too low, the machine will automatically start
looking for a charging base for charging.
If the machine is not used for a long time, please fully charge the battery and turn off the
power switch.
If the machine is not used for more than 3 months, please use the charger to charge it for 5
hours before use.
Battery removal and replacement
1、
Remove the screws from the battery cover plate with a screwdriver.
2、
Remove the battery cover and take out the battery.
3、
Unplug the connector which connects the battery and the host.
4、
Put the new battery into the battery jar.
5、
Connect the battery to the connector of the host.
6、
Put the battery cover back in its place.
7、
Lock the battery cover plate.
Notice: Please do not use batteries that are not configured in this machine, otherwise the
machine will be damaged.
Quick operational guideline
Before use, please put machine flat on the ground in the static state.
Turn on the power switch, short press START key of the host, making the machine enter the
automatic cleaning state.
After cleaning, the machine will look for the charging base automatically. If charging base is
found, the machine will enter the charging state; if not, the machine will enter standby state
or shutdown.
Use of the host keys
Short press (START) key under the dormant state to enter the standby state.
Short press (START) key under the standby state to enter the working state.
Short press (START) key under the working state to enter the standby state.
Long press (START) key for 5s under the standby state to enter the dormant state.
11