Easypix GoXtreme Rebel Manual - Página 6
Procurar online ou descarregar pdf Manual para Câmaras de ação Easypix GoXtreme Rebel. Easypix GoXtreme Rebel 13 páginas.
Imprimir página
Introduction
1. Insert MicroSD card
Note: Please use brand MicroSD card and format the card inside the camera using
the settings menu under "format SD card" before using. Ordinary neutral cards
cannot be guaranteed to work
properly.
2. Installing and removing the battery
A. Open the battery compartment cover.
B. Insert the battery so that the contacts on the battery match the contacts inside
the camera.
C. To remove, open the battery compartment and remove the battery.
3. Charging the battery
A. Connect the camera to the USB-slot of a computer or to a power adapter for
charging.
B. You can use a car charger to charge the battery in a car.
C. When charging, the red indicator light is on. If the device is fully charged, the
red light turns off.
D. The charging process is faster while the camera is powered off.
4. Turn camera On and Off
A. Starting: Press the "Power button/Mode key" for about 3 seconds. The blue light
turns on and the display shows the start screen.
B. Shutdown: Press "Power button/Mode key" for about 3-5 seconds, the blue light
turns off and the display will show the end screen.
5. Mode switch
A. Press the mode key to open the mode. Press the button repeatedly to cycle
through the different modes (video / camera / playback / setup mode).
B. The
top left indicates the video mode
indicates the photo mode,
indicates the playback mode and the
indicates the setup mode.
6. Video
A. Insert a memory card and press the "Power button/Mode key" to turn the camera on.
B. After the camera is started, press the "Enter/OK key" to start video recording.
During recording, the indicator dot at the top left hand of the screen will flash
Yellow/Red and show the recording time counter(Red).