Axis Axis 211 Manual de instalação rápida - Página 6
Procurar online ou descarregar pdf Manual de instalação rápida para Câmara de segurança Axis Axis 211. Axis Axis 211 8 páginas. For somat edaq; somat edaq lite; axis m7001 video encoder; korenix jetnet poe switch
Também para Axis Axis 211: Especificações (6 páginas), Brochura e especificações (4 páginas), Brochura (2 páginas), Especificações (2 páginas), Manual de início rápido (16 páginas)
Imprimir página
Manual Installation with ARP/Ping
1. Acquire an unused IP address for the AXIS 210/211. This IP address must be on the same
subnet as your computer.
2. Locate the serial number (S/N) on the camera's underside label.
3. From a computer on your network, open a Command Prompt (in Windows: from the
Start menu, select Run... and type cmd in the field. Click OK).
4. As appropriate for your operating system, enter the following commands:
Windows syntax:
arp -s <IP Address> <Serial Number>
ping -1 408 -t <IP Address>
UNIX/Linux/Mac syntax:
arp -s <IP Address> <Serial Number> temp
ping -s 408 <IP Address>
5.
Check that the network cable is connected. Start/restart the camera by disconnecting and
reconnecting the power cable (or the network cable if using PoE on the AXIS 211).
6.
Close the Command prompt when you see 'Reply from 192.168.0.125: ...'
7.
The IP address has been set when the Power indicator is permanently lit and the Network
indicator flashes intermittently.
8.
Start your browser, enter the IP address of the camera in the Location/Address field and
press Enter on your keyboard. See below for instructions on how to set the password.
Note:
After installation, the One-click installation method can be used to obtain a DNS name for the AXIS 210/211.
Setting the Password
1.
When accessing the AXIS 210/211 for the first
time, the 'Configure Root Password' dialog will
be displayed on the screen.
2.
Enter a password and then re-enter it, to confirm the spelling. Click OK.
3.
The 'Enter Network Password' dialog will appear. Enter the User name: root
Note: The default administrator user name root is permanent and cannot be deleted.
4.
Enter the password as set in step 2 above, and click OK. If the password is lost, the AXIS
210/211 must be reset to the factory default settings. See below.
5.
If required, click Yes to install the AXIS Media Control (AMC). You will need administrator
rights on the computer to do this.
Windows example:
arp -s 192.168.0.125 00-40-8C-18 -10-00
ping -1 408 -t 192.168.0.125
UNIX/Linux/Mac example:
arp -s 192.168.0.125 00:40:8c:18:10:00 temp
ping -s 408 192.168.0.125