HTC 650 HDX Manual - Página 8
Procurar online ou descarregar pdf Manual para Máquina de chão HTC 650 HDX. HTC 650 HDX 40 páginas.
Também para HTC 650 HDX: Manual do utilizador (48 páginas)
Introduction
Note!
This symbol means Note! and indicates a potential risk of material damage in
the event of incorrect use of the machine. If you see this symbol next to a
section of text, you must pay particular attention when reading through the text
and not carry out any operations of which you are unsure. This is to avoid
damage to the machine.
Tip!
This symbol means Tips! and implies the inclusion of tips and advice on
effective use of the machine or ways of reducing wear and tear to the machine.
If you see this symbol next to a text, you should read through the text to make
your work easier and to extend the service life of the machine.
1.4
Transportation
Always make sure that the grinder is securely anchored to its surroundings and the
grinding head is lowered against the surface. Make sure that the securing straps, or other
equipment used for anchoring during transport, are tightened over non-moving parts,
e.g. the grinder's chassis.
The machine can also be transported with other lifting equipment, for example truck or
crane, using the lifting eyes provided. In which case, make sure that the weights are
locked in the forward position and that the handle is in its back position, see Figure 4-3,
page 16 and Figure 4-2, page 15.
When lifting the grinder, lifting straps must be used. These must be attached
well-secured in the lifting eyes provided. Only use lifting straps approved for lifting
equipment.
Do not transport the grinder on sloping surfaces, e.g. loading ramps, without securing it
by the lifting eyes for example with a winch. This is a safety measure in case the grinder
starts to roll out of control. Also make sure that people (including operator) in the
vicinity are at a safe distance in order to prevent personal injury, in the event that the
grinder starts to roll out of control.
1.5
On delivery
The following items are included in the delivery. Contact your retailer if anything is
missing.
•
Grinding machine
•
Manual disc
•
Locking key for control cabinet
2
HTC 650 HDX
3.0