HTC 800 Classic Manual - Página 24

Procurar online ou descarregar pdf Manual para Máquina de chão HTC 800 Classic. HTC 800 Classic 36 páginas.

Usage

4.8

Operation

The machine's functions can be controlled using the control panel - see

page

10.

During operation, the operator pushes the grinder forwards over the floor surface.

4.8.1

To activate the machine's functions, turn the ON/OFF knob to the right. When the knob

is in this position, the green Standby light (DUTY) is lit, indicating that the machine is

in standby mode.

4.8.2

The emergency stop switch, (EM-Stop) must only be used in an emergency.

When the switch is pressed, all electrically-powered equipment on the machine are

turned off.

Note!

Do not use the emergency stop switch to stop the machine other than in

emergencies, as it decreases the lifespan of the machine's electrical

components.

Note!

As long as the emergency stop switch (EM-Stop) is pressed, the machine

cannot be started. Reset by turning the switch 45° so that it pops out again. The

machine can then be restarted.

4.8.3

For a description of the control panel,

1. Make sure the emergency stop switch is not activated.

2. Insert the cable.

3. Start the dust separator if dry grinding is to be done.

4. Turn the ON/OFF knob to the right.

5. Start the grinding discs rotation, by turning the REW/FWD knob to the desired

direction of rotation.

see Figure 3-3, page

10.

HTC 800 Classic

Figure 3-3,

1.0