EasyRobotics PROFEEDER X Manual do utilizador - Página 16
Procurar online ou descarregar pdf Manual do utilizador para Robótica EasyRobotics PROFEEDER X. EasyRobotics PROFEEDER X 16 páginas.
Imprimir página
10 Declaration of incorporation of partly completed
machinery (for CE-marking)
Declaration of incorporation
according to the EU Machinery Directive 2006/42/EC, Annex II 1. B
for partly completed machinery
Manufacturer
EasyRobotics ApS
Mommarkvej 5
DK - 6400 Sønderborg
Person established in the Community authorized to compile the relevant technical documentation
Per Lachenmeier
EasyRobotics ApS
Mommarkvej 5
DK - 6400 Sønderborg
Description and identification of the partly completed machinery
Product / Article
Type
Project number
Commercial name
Function
It is declared that the following essential requirements of the Machinery Directive 2006/42/EC have
been fulfilled:
1.2.4.3, 1.3.1, 1.3.2, 1.3.7, 1.5.3, 1.6.3, 1.7.3, 1.7.4
It is also declared that the relevant technical documentation has been compiled in accordance with
part B of Annex VII.
Reference to the harmonized standards used, as referred to in Article 7 (2):
EN ISO 12100:2010-11
EN ISO 4414:2010
EN 1037:1995+A1:2008
The manufacturer or his authorized representative undertake to transmit, in response to a reasoned request by the
national authorities, relevant information on the partly completed machinery. This transmission takes place
This does not affect the intellectual property rights!
Important note! The partly completed machinery must not be put into service until the final machinery
into which it is to be incorporated has been declared in conformity with the provisions of this Directive,
where appropriate.
Sønderborg, 03/03/2020
Place, Date
Revision: 2020-08
EasyRobotics ApS
ProFeeder X
PFX-1001-10
0063-00002
ProFeeder X
The ProFeeder X (when robot is installed) is to be used for automated feeding for CNC machines and
other machines/workplaces.
The ProFeeder X provides a framework for the robot's location and it contains both the processed and
unprocessed parts.
Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO
12100:2010)
Pneumatic fluid power — General rules and safety requirements for systems and their components
(ISO 4414:2010)
Safety of machinery - Prevention of unexpected start-up (Amendment)
ProFeeder X User-Manual (en)
Signature
Per Lachenmeier
CEO
Page 15 of 15