Dickey-John GAC 2700-UGMA Manual de início rápido - Página 8
Procurar online ou descarregar pdf Manual de início rápido para Instrumentos de medição Dickey-John GAC 2700-UGMA. Dickey-John GAC 2700-UGMA 12 páginas. Grain analysis computer
M a i n t e n a n c e
The GAC
2700 utilizes an RF frequency of 149 MHz to make
®
measurements within the machine. It is not a strong signal strength.
If potential interference is determined to originate from the GAC 2700
simple corrective steps can be taken; move the products further apart
from each other, re-orientate the products to each other.
IMPORTANT: It is highly recommended the unit be regularly
inspected and cleaned to ensure continued and consistent results.
For optimum performance, extensive cleaning should be
performed weekly or more often, as needed, based on surrounding
environmental conditions. Factors such as dust, temperature
extremes, grain dust, and external humidity vary from location
to location. If there are any questions about the cleanliness or
instrument performance, contact your local authorized
service center.
For customers that require a more extensive cleaning, contact and
schedule your instrument for cleaning with your dealer or
authorized service center.
Note: The following recommendations are provided as a guideline to
maintain a robust and quality operating instrument. It should not be
interpreted as an exhaustive maintenance program. Dust and debris may
periodically accumulate in areas not specified in this manual. The owner
is responsible for ensuring overall equipment cleanliness. If any
questions arise regarding the maintenance or performance of the
instrument, contact your dealer or local authorized service center.
EXTERNAL CLEANING
The LCD display may require periodic cleaning. Use a commercial
cleaner for glass lenses to remove dust.
The GAC
2700 surface can be cleaned with any cleaner designed for
®
plastic and stainless steel surfaces.
Periodically use a rag to wipe the grain hopper and the (2) upper grain
hopper sensors.
GAC
®
2700-UGMA QSG
6015415 Rev C
Do not apply water, organic solvent
or chemicals, such as acid and alkali,
to the LCD display.
7