Dickey-John CSS 110 Manual - Página 11

Procurar online ou descarregar pdf Manual para Controlador Dickey-John CSS 110. Dickey-John CSS 110 13 páginas. Automatic sprayer controller

Imprimir página

OPERATOR'S MANUAL

NOTE: Replacing nozzles with different

characteristics and dimensions

requires an update to the

Nozzle Pressure and Nozzle

Flow screens.

Constant

Application Rate

Application Rate +/-

Nozzle Spacing

Number of Nozzles

Section Nozzle

Nozzle Pressure

Nozzle Flow

Flush Pressure

Conversion Factor

Zero Pressure Calibration

Grand Speed Calibration

Pressure Limits

Minimum Speed

CSS 110 Automatic Sprayer Controller

11001-1679-201606

OPERATION

STARTUP

1. Power ON by pressing the OK button.

– A startup page briefly appears

2. The pressure limit screen appears with the corresponding speed limit.

3. The Main screen eventually displays with the last application rate

used.

– If the indication "OFF" displays, return the control switch to the

"OFF" position.

4. The CSS 110 is now operational.

5. Begin driving.

6. Push and hold the control switch into Flush position until minimum

drive speed is reached and "FLUSH" appears on screen.

7. Release the control switch when "FLUSH" changes to "AUTO".

– The system will automatically adjust by opening or closing the

control valve based on the speed of advancement and will maintain

the required application rate.

If ground speed exceeds the maximum speed set, the valve will stay in the

position corresponding to the maximum pressure programmed and an

alarm occurs indicating that the rate in volume/area is not correct.

– To correct, decrease speed until volume/area alarm stops.

CONSTANT TABLE

Programmed constants are stored in memory and maintained with the

power supply of the CSS 110. Enter stored values in below table for

reference.

Value

Description

Application Rate in (l/m

Application Rate +/- (l/m

Nozzle spacing (nm)

Total number of nozzles

Nozzle number for section

Reference pressure (bar)

Pressure flow (l/min)

Opening valve pressure (FLUSH)

Conversion factor

Zero pressure calculated

Ground speed constant calibration

Max and min pressure limits

Minimum speed

)

OPERATION / 9