Dickson SP125 Manual - Página 4

Procurar online ou descarregar pdf Manual para Registadores de dados Dickson SP125. Dickson SP125 9 páginas. Temperature data logger
Também para Dickson SP125: Manual (3 páginas)

Imprimir página
Dickson SP125 Manual
Cases
Locking Wall Mount Case
Waterproof Pouch
Probes & Cables
4" Piercing Probe, 5' Coiled Cable, +1650°F, +900°C (316 Stainless Steel)
5" Immersion Probe, 5' Coiled Cable, +1650°F, 900° (316 Stainless Steel)
6" High Immersion Probe, 6' Straight Cable, +2100°F, +1148°C (316 Stainless Steel)
K-Thermocouple 100' Straight Extension Cable
K-Thermocouple 10' (3.05m) Straight Extension Cable
Angled Surface Probe w/ Mini Connector
Calibration Services - New Units
•
N100 - NIST Traceable Calibration 1-Point: Includes documentation to one Dickson pre-selected
point on new units only.
•
N300 - NIST Traceable Calibration 3-Point: Includes documentation of three Dickson pre-
selected points (a high, medium, and low) on new units only.
The Importance and Benefits of Regular Calibrations
Once you begin to use your precision Dickson instrumentation, regular calibrations are necessary to ensure
accurate readings.
The following Calibration Services are available:
•
N150 - NIST Traceable Calibration 1-Point: Includes documentation to one Dickson pre-selected
point after re-calibration.
•
N350 - NIST Traceable Calibration 3-Point: Includes documentation of three Dickson pre-
selected points (a high, medium, and low) after re-calibration.
Why should I recalibrate my instrumentation?
•
Over time dirt, dust and normal handling can throw your precision instrumentation out of calibration.
Regular calibrations ensure that you receive the most accurate readings possible.
How often should I recalibrate my instrumentation?
•
Depending on the environment your instrument is used in and how often it is handled you will want
to recalibrate your instrument every 6 to 12 months. Instruments in environments where there are
extreme temperatures, wide temperature ranges, humidity or pressure variations, high condensation,
dirt, dust and other debris will require calibration at least every 6 months. Instruments that are
frequently moved or in locations with heavy machinery that cause vibrations should also be calibrated
at least every 6 months.
Why should I return my instrument to Dickson for calibration?
•
Dickson calibrates your instrument at the factory using proprietary production/calibration software
that guarantees proper calibration.
Our Capabilities
Dickson is the first manufacturer of humidity and temperature instrumentation to receive A2LA accreditation.
We are also NIST Traceable; our procedures conform to MIS-STD-45662A, ANSI/NCSL 2540-1-1994, ISO/IEC
Rev. 04/08
A715
A713
D605
D608
A203
A202
D617
D606