Axis 240Q Blade Manual de instalação - Página 7
Procurar online ou descarregar pdf Manual de instalação para Servidor Axis 240Q Blade. Axis 240Q Blade 9 páginas. Video server
Também para Axis 240Q Blade: Especificações (6 páginas), Especificações (2 páginas), Especificações (2 páginas), Ficha de dados (2 páginas), Ficha de dados (2 páginas)
Imprimir página
Connecting the video server to the rack
3. Referring to the AXIS 240Q Installation Guide, install the AXIS 240Q Blade on your
network. Keep in mind the following details:
• Network - connect the Ethernet cable to the Ethernet connector on the rack, in the
position where the video server is to be connected.
• Power - this is supplied via the bus connector. Slide the blade video server into the
slot. Make sure the bus connector is securely connected to the I/O terminal block
connector at the back of the rack. When repeating the installation procedure for
each individual blade video server, simply disconnect the blade video server from
the rack (i.e. do not disconnect the power cable).
• Secure the video server to the rack using the screws on the front panel. The rack
accommodates up to 12 Axis Blade Video Servers. To comply with EMC
regulations, ensure that all empty slots are covered using the supplied cover plates.
AXIS 240Q Video Server User's Manual
The functionality of the AXIS 240Q Blade Video Server is the same as in the standalone
version. For more information on how to use and configure the video server rack on your
network, please refer to the AXIS 240Q Video Server User's Manual, available on the CD
supplied with this product, or from the Axis Web site at www.axis.com
AXIS 240Q Blade - Rack Solution Installation Guide
Please read through the instructions below before
beginning the installation.
1. Connect the power cable to the power connector
on the rack. Make sure that the green power
indicator is lit.
2. Note the Serial number (S/N) on the front panel
on the video server. You need to know this to set
the IP address.
Power
Indicator
7