Dictator DICTAMAT 50 WS-MFL Manual técnico - Página 7
Procurar online ou descarregar pdf Manual técnico para Sistema de abertura de portas Dictator DICTAMAT 50 WS-MFL. Dictator DICTAMAT 50 WS-MFL 17 páginas.
Ill. 13
Step 1
Step 2
Step 4
. 14
Ill
© DICTATOR Technik GmbH • Gutenbergstr. 9 • 86356 Neusäß • Germany
Tel. +49(0)821-24673-0 • Fax +49(0)821-24673-90 • E-mail info@dictator.de • 201906
C) Installation of the DICTAMAT 50 WS-MFL - cont.
(1) Changing the damping direction
Step 1: Unscrew the four fixing screws of the cover and take off the
cover (see ill. 14).
Step 2: Take out the wire rope wheel and turn it (For taking it out, if
necessary, turn the radial damper upside down and softly hit something
solid. Then the wire rope wheel will fall out!):
Wire rope wheel with the writing pointing upwards (see ill. 13):
with the writing pointing downwards: damping clockwise
Then put back the cover and fix it again with the screws.
(2) Positioning the attachment for a different guiding of the
rope
Step 1: See "Changing the damping direction"
Step 2: See "Changing the damping direction"
Step 3: Remove the guide bushes (if necessary use a small screw driver
Step 3
to push the bushes out). Below these are the fixing screws of the wire
rope attachment.
Step 4: Loosen the four screws of the wire rope attachment and pull it
off the axle of the radial damper.
Step 5: Turn the attachment so that the bores for the plastic bushes
show in the direction of the rope and then put it back on the axle of the
radial damper. Then again tighten the wire rope attachment and insert
the guide bushes.
Step 6: Check whether after having turned the attachment, the damping
direction is correct. If not, correct it (see above step 2).
Step 7: Then again tighten the cover.
Technical Manual
DICTAMAT 50 WS-MFL
damping anticlockwise,
Page D50WS-MFLHB.07