Axis APPINT Manual de integração - Página 9
Procurar online ou descarregar pdf Manual de integração para Servidor Axis APPINT. Axis APPINT 10 páginas. Application integration
Imprimir páginaScanning profile used.
Paper size.
Number of pages.
If you selected Include Image Information: Complete, then additional information, such as
resolutions and file format, is also included.
Your application can use values in the information file to trigger actions.
pre-defined scanning profile Text. Here, Image Information Included is set to Complete. If it
was set to Basic, the Image Information part would not be present.
; AXIS 700 Parameter List, V1.10 Jul 29 1998
[General]
File name
File size
Host address
Scanner
Destination
Profile
Paper size
Number of pages
[Image Information]
Width
Height
Resolution (DPI)
Bits per pixel
Data type
Paper orientation
Format
Double-sided
Intensity
Contrast
; End of Parameter List
It is important to notice that the information file is always written after the image file. Thus
when your application processes the information file the image file itself is guaranteed to be
there already.
A document distributing system may check the file name to see whom the image is
targeted for. The file name may then be on the form name_lastNameXXX.tif, where XXX is
the sequence number optionally appended by your AXIS 700. Your application can now
decide whom to send the image to.
A fax server application can use the image name to obtain the fax number, and the
file format to decide how to convert the document to fax data.
See the AXIS 700 Additional Installation Note, Setting Up Your AXIS 700 for Scan-to-File for
information on how to define Scan-to-File destinations.
The following example is taken from a real scanning, with the
= branko_subasic001.tif
= 71413
= 172.19.4.22
= FCPA ScanPartner 600C
= Branko FTP
= Text low
= Letter
= 2
= 1696
= 2200
= 200
= 1
= Black & white
= Portrait
= CCITT G.4
= Off
= 50
= 50
9