Axis 540 series Manual de instalação rápida - Página 4
Procurar online ou descarregar pdf Manual de instalação rápida para Servidor de impressão Axis 540 series. Axis 540 series 12 páginas. Ethernet and token ring print servers
Também para Axis 540 series: Especificação (6 páginas), Manual do utilizador (4 páginas)
Imprimir páginaHardware Installation
1. Note the serial number found on the underside label of the
AXIS 540/640. You need this number during the configuration.
2. Switch off the printer and plug the AXIS 540/640 into the
printer's parallel port.
3. Connect the AXIS 540/640 to the network using an appropriate
Ethernet or Token Ring cable.
4. For the AXIS 640/642 only: Slide the Ring Speed Switch to 4 or
16 as appropriate for your Token Ring network.
5. Switch on the printer and connect the external power supply to
the AXIS 540/640. Ensure that the Network Indicator is
flashing.
6. Successful output of a Test Page will effectively confirm that the
unit has been connected correctly. Press the Test Button to print
a Test Page.
Macintosh
Important note:
AppleTalk is only supported by AXIS 540+ and AXIS 542+.
Open the Chooser window by selecting Chooser in the Apple menu.
Follow these steps to choose a printer:
1. Click on the LaserWriter (or LaserWriter 8.0) Icon.
2. If your network has more than one zone, click the name of the
default zone.
3. Click the name of the printer you want. The default printer name
is shown as: AXIS<nnnnnn>_<port>, where <nnnnnn> is the last
six digits of the serial number, and <port> is LPT1, e.g.
AX540B35_LPT1.
4. For LaserWriter 8.0 printer driver only:
Click Setup..., and then Select Auto Setup. If the printer, just as
the print server, supports bi-directional printing the installation
will then be automatically performed. If not, you will be
prompted to select a PPD file matching your printer, then click
OK.
5. Click the close box.
The AppleTalk Configuration is now complete. Repeat this
procedure for each Macintosh using the AXIS 540/542.