Alpha Networks Extreme WUS-ND12A Manual de instalação rápida

Procurar online ou descarregar pdf Manual de instalação rápida para Adaptador Alpha Networks Extreme WUS-ND12A. Alpha Networks Extreme WUS-ND12A 7 páginas. 802.11a/b/g/n usb module

Imprimir página

Quick Install Guide

802.11a/b/g/n USB module

Thank you for purchasing the Xtreme N® Dual Band USB Adapter. Follow the

easy steps in this guide to properly set up your adapter. Please verify that all the

package contents listed below are available.

Package Contents

WUS-ND12A 802.11a/b/g/n USB module

CD with drivers and software

If any of the above items are missing, please contact your reseller.

System Requirements

• A desktop computer with an available USB slot

• Windows® 7, Windows Vista® (32/64-bit), XP (32/64-bit with Service Pack 2 or

higher)

• 300MHz processor and at least 64MB of RAM

• An 802.11n, 802.11g or 802.11a access point or wireless router

DWA-160

What This Product Does

The WUS-ND12A is an 802.11a/b/g/n USB module that delivers unrivaled

performance for your laptop or desktop computer. Once connected, access your

network's high-speed Internet connection while sharing photos, files, music,

video, printers, and storage.

Before You Begin

Before installing your new wireless module, please verify the following:

• Remove any previous installations of wireless adapters.

• Disable any built-in wireless adapters.

• Verify the settings such as the wireless network name (SSID) and security

settings of the network(s) you want to connect to.

Note: If you've installed a different manufacturer's adapter or a different model

module, make sure the software is uninstalled before installing the new

software. Some utilities may cause a conflict with the new software. Windows

Windows Vista

and XP users may use the built-in wireless utility.

Installation

Note: Do NOT plug the adapter into your computer before installing the

drivers.

Insert the WUS-ND12A Driver CD into the CD-ROM drive. When the autorun screen

appears, click Install and follow the on-screen instructions to install the wireless

adapter drivers and software.

If the CD Autorun function does not automatically start on your computer, go to

Start > Run. In the run box type "D:\autorun.exe" (where D: represents the drive

letter of your CD-ROM drive) and click OK.