ALPHA PLAM ALPHA FURNACE 2014 Instruções de instalação, ajuste e utilização - Página 6

Procurar online ou descarregar pdf Instruções de instalação, ajuste e utilização para Forno ALPHA PLAM ALPHA FURNACE 2014. ALPHA PLAM ALPHA FURNACE 2014 9 páginas. Solid fuel programme

Imprimir página

protected must be at least 30 cm on the side and 30 cm on the back of the furnace. Flammable items

need to be at a distance of at least 80 cm from the opening of the furnace.

You should leave sufficient space between the furnace and the flammable objects (wood paneling,

furniture, curtains, etc.).

Installation of objects above the furnace is not allowed if you use the furnace top surface.

When installing the drain pipes for used air, you should leave a gap of at least 40 cm away from the

flammable materials.

Before connecting the furnace to the chimney, you should consult a competent local chimney sweeping

institution. Connecting the chimney to the furnace is done through the connecting elements in

SRPS.M.R4.031 (DIN 1298 or DIN EN 1856-2). Make sure that the connecting parts for the chimney do

not enter the waste gases drain intersection, and that they are properly sealed

5. Air Regulation

Air regulation is done on the front side of the furnace under the cover.

Air regulators on the front side of the furnace enable the ignition and fuel combustion.

Make sure that the ash tray is not filled up. You should empty it regularly as to enable the unobstructed

airflow.

Due to the poor supply of oxygen, there are large emissions of harmful substances, which can lead to

blocking the chimney.

5.1 Primary Air

Fig. 2

NOTE: To avoid overheating of the furnace, the quantity of fuel must not exceed 2.0 kg of dry log wood or

brown coal briquettes per hour, when the combustion air is properly adjusted.

5.2 Using the Handle on the Firebox Door

Reliable fuel combustion is determined based on the primary

combustion air.

This air is adjusted by regulating the primary air to the front side of

the furnace under the cover. Air regulation is done on the front side

of the furnace under the cover.

Figure 2, position 7 shows the opening and the closing

direction of the regulator. To fire the wood, the regulator

needs to be opened as much as possible.

As the handle on the firebox door

becomes extremely hot while the furnace is

in operation, opening and closing of the firebox door

is possible only by using a special key from the

attached furnace accessories (see Fig. 3).

Fig. 3