DIEBOLD NIXDORF TH250 Referência rápida - Página 2

Procurar online ou descarregar pdf Referência rápida para Impressora DIEBOLD NIXDORF TH250. DIEBOLD NIXDORF TH250 2 páginas.

Imprimir página

Run a diagnostic test print

Open

cover

Configure the printer if necessary

Safety instructions

Do not touch the printer's cutter and tear bar.

The print head is a thermal element and it is at

high temperature during printing or just after

operation. Therefore, do not touch it and its

peripherals for safety reasons.

The thermal head is an ESD-sensitive device. To

prevent damage, do not touch either its

printing part or connecting parts.

Push and hold

Paper Feed

Button while

closing cover

The TH250 is an ENERGY STAR® qualified

printer. To set or to adjust the energy-savings

timeout value:

Select "Set Firmware Features" from the main

menu. Scroll to "Set Enter ENERGY STAR

Timeout Value?" Select "Yes". Printer responds

with the following timeout value selections:

- Disable (no timeout) -> 1 click

- 15 minute timeout

-> 2 clicks

- 30 minute timeout

-> 3 clicks

- 60 minute timeout

-> 4 clicks

Enter clicks for selection, then hold button

down at least 1 second to validate.

Power cycle the printer.

To revive a printer that has entered the energy-

savings mode, press the paper feed button.

Current printer tallies are

printed after the

diagnistic information

and will vary per printer

use.

Caution:



Install the printer on a flat and stable place.



Reserve adequate space around the printer so that

convenient operation and main-tenance can be

performed.



Keep the printer away from water source.



Do not use or store the printer in a place exposed to

heat or fire, moisture, serious pollution and direct

sunlight.



Do not place the printer on a place exposed to

vibration or impact.



No dew condensation is allowed to the printer. In case

of such condensation, do not turn on the power until

condensation completely disappeared.



Only use power supply units and cables released by

Wincor Nixdorf.



Connect the printer to "UL Listed Computers" only.



Only connect cables to the 24V connector which are

marked with DP-1 or DP-2.



The printer should only be disassembled or repaired

by a technician who is certified by the manufacturer.

Further Information

Please find detailed information about the printer in the

Operator's Guide. That document as PDF file and needed

drivers can be downloaded from this web site:

http://www.wincor-nixdorf.com

http://www.wincor-

nixdorf.com/internet/site_EN/E

N/Support/Downloads/POSLotte

rySystems/poslotterysystems_no

de.html

Consumables

Please order consumables at:

http://www.wincor-nixdorf.com/mediaservice

The reproduction, transmission or use of this document or its

contents is not permitted without express authority.

Offenders will be liable for damages.

All rights, including rights created by patent grant or registration

of a utility model or design, are reserved.

Delivery subject to availability; technical modifications

possible.

Order No. 01750275431 C