DieHard 200.71233 Manual do Proprietário - Página 6
Procurar online ou descarregar pdf Manual do Proprietário para Carregador de bateria DieHard 200.71233. DieHard 200.71233 15 páginas. Battery charger 50/1512 amp manual; engine starter with battery tester and air compressor 225/125 amp
Também para DieHard 200.71233: Manual do Proprietário (15 páginas)
Imprimir página
AxleAssembly(continued):
Place the charger on its side. Place one end of each
bracket into slot, then place the axle assembly under
each bracket. Fasten the other side of each bracket
using the two, 10-32 thread cutting screws provided.
Handle:
Turn the charger right side up onto its foot and wheels.
Remove the two top screws from each side of the
charger. Align the handle so the screw holes are
aligned with the screw holes on each side of the wheel
charger. Attach handle using the same screws.
Plugging
it in
Your charger should be grounded to reduce the
risk of electrical shock.
Your charger is equipped with an electrical cord that
has an equipment grounding conductor and a ground-
ing plug designed to be used on a 120 volt circuit. The
plug must be plugged into an outlet that has been
properly installed and grounded in accordance with all
local codes and ordinances.
(D
@