Olympus C5000 - 5MP Digital Camera Manual de instalação do software

Procurar online ou descarregar pdf Manual de instalação do software para Câmara digital Olympus C5000 - 5MP Digital Camera. Olympus C5000 - 5MP Digital Camera 2 páginas. Software installation guide (160 kb)
Também para Olympus C5000 - 5MP Digital Camera: Manual de início rápido (2 páginas)

Imprimir página

VT327802

CAMEDIA Master CD-ROM

CAMEDIA Master is a photo application that allows you to download, view, organize, retouch, and print pictures taken with your digital camera. These instructions will guide you through the installation and first time usage of this software. It is strongly recommended that you follow these procedures step-by-step.

SYSTEM REQUIREMENTS

Make sure your computer meets the following minimum system requirements.

Windows

Pentium or later

CPU

64MB or greater

RAM

120MB minimum available HD space

Hard disk

Windows 98, 98SE, Me, 2000, XP

Required software

USB Port

Interface

* This software is intended for single-user usage. Windows server versions and installation on a

network fileserver is not supported.

* Windows 95, Windows 98 upgrade (from Windows 95), and Windows NT do not support

USB devices.

* Mac OS 8.6 users need to install the Apple USB Mass Storage Support 1.3.5 update to connect

a USB Olympus camera (available for download from www.apple.com).

INSTALLING THE SOFTWARE

Installing the camera software will only need to be performed once.

Windows

a. Installing CAMEDIA Master 4.0

1. Disable any virus protection software installed on your computer before proceeding withthe

installation.

2. Insert the CAMEDIA Master software CD into your CD-ROM drive. An Olympus Software Setup

Menu should automatically launch.

Note: Depending on your PC settings, the menu window may not launch automatically.

In this case, open "My Computer", open the CD-ROM drive

icon (should be labeled "CM&INST"),

and then double-click SETUP.EXE.

3. Click "CAMEDIA Master 4.0" to proceed with the

installation.

4. Click the appropriate language choice.

CAMEDIA Master requires the Apple QuickTime program.

If QuickTime has already been installed, the installation

routine will skip directly to Step #9. If not, the QuickTime 5

Setup program will automatically run.

5. If you do see a "Welcome to QuickTime 5" installation window, skip to step #9. To continue

installing QuickTime, follow the on-screen prompts. We recommend using all of the suggested

settings.

6. When prompted for QuickTime registration information, leave all fields blank. Simply click Next

to continue.

7. The QuickTime files will now be copied to the appropriate folders. A "QuickTime Settings" window

will appear. Click Next for the first two and Finish for the last.

8. A screen will appear informing you when the installation is complete. Click "Close" to finish the

QuickTime installation.

9. The CAMEDIA Master setup window will appear. Follow the on-screen instructions to continue.

10. You will be prompted for User Information.

Type in your name in the Name field. Locate the

CAMEDIA Master 4.0 CD envelope. Open the

envelope and find the CAMEDIA Master 4.0

serial number that is printed on an affixed label.

SOFTWARE INSTALLATION & DOWNLOAD GUIDE

NOTE: Please pay special attention to differences between "1" and "I", "0"(zero) and "O", "5" and "S".

Enter the alphanumeric digits in the appropriate fields. Click Next and continue following the on-

screen prompts. We recommend using all of the suggested settings.

Macintosh

11. When the "setup of CAMEDIA Master 4.0 is complete" dialog appears, click "Finish".

Power Macintosh

40MB or greater for applications

12. A README file is displayed. This file contains important update information. When you are

120MB minimum available HD space

finished reading, close the document by clicking {close window symbol}. The screen returns to

Mac OS 9.0 (8.6) - 9.2/OS X 10.1

Olympus Windows Installer.

USB Port

b. Installing the USB Driver for Windows 98

If you are not using a Windows 98 PC, please skip this section. If you are using a Windows 98 PC,

the camera will require the installation of a USB driver before it can be recognized. Follow the

instructions below:

1. Click USB driver for Windows 98 from the Olympus Software Setup Menu.

2. Click Continue and the USB driver installation will automatically start.

3. Click OK to restart your computer and the installation is complete.

c. Installing Acrobat Reader

Adobe Acrobat Reader is used to read the electronic documentation supplied for the camera and

software. Users who already have Acrobat Reader installed on their computer can skip this section.

1. Click Acrobat Reader on the Olympus Software Setup Menu.

2. Click an appropriate installation language choice.

3. The Acrobat Reader 5.0 installation window appears. Click Next.

4. Follow the on-screen prompt to continue installing this program. We recommend using all of the

suggested settings.

5. When the "Thank you for choosing Acrobat Reader!" message appears, click OK.

d. Reference Manual

The complete Reference Manual for your camera is available on the CAMEDIA Master 4.0 CD. This

manual contains full information on the usage and functions of your camera. Adobe Acrobat Reader

must be installed to view this document. The Reference Manual can be viewed on screen or printed.

To access the Reference Manual:

1. Click on "Reference Manual" from the Olympus Software Setup Menu.

2. Click on the appropriate language.

e. Closing the Olympus Software Setup Menu

1. After you have completed all the selections from the Setup Menu, click "Close" to exit the

window. You may remove CD at this time. Store the disc for future reference.

Macintosh

a. Installing CAMEDIA Master 4.0

1.Turn off any virus protection software.

2.Insert the CAMEDIA Master software CD into your CD-ROM drive.

3.The CD-ROM window automatically appears.

Note: If not, find the CM4&INST icon on your desktop and double-click it.

5.0

for Windows® & Macintosh™

4. Double-click the folder that matches your operating system.

5. Double-click on the CAMEDIA Master folder.

6. Double-click on the appropriate installation language icon.

7. Double-click the "CAMEDIA Master Installer" icon.

8. Follow the on-screen prompt to continue installing the program. We recommend using all of the

suggested settings.

b. Installing QuickTime 5.0

CAMEDIA Master requires the Apple QuickTime program to be installed. You do not need to install

QuickTime 5.0 if this program has already been installed. If your Macintosh has an earlier version of

QuickTime, you must install version 5.0.

NOTE: Mac OS X users can skip this section. Use the QuickTime pre-installed on your Macintosh.

1. Follow steps 1 to 5 of the Macintosh CAMEDIA Master installation procedure. Double-click the

"QuickTime Installer" icon.

2. The Welcome to QuickTime 5 installation window appears. Follow the on-screen prompts to

continue installing the program. We recommend using all of the suggested settings.

3. Select "Recommended" for the installation type and then click Continue.

4. When prompted for QuickTime registration information, leave all fields blank. Simply click Next to

continue.

5. The QuickTime files will now be copied to the appropriate folders. When the QuickTime Settings

dialog boxes appear, click Next twice and then Finish.

6. When the Installation Complete screen appears, click Quit.

c. Installing Acrobat Reader

4.0

Adobe Acrobat Reader is used to read the electronic documentation supplied for the camera and

software. Users who already have Acrobat Reader 4.0 installed on their computers can skip this sec-

tion.

NOTE: Mac OS X users can skip this section. Use the Acrobat Reader pre-installed on your

Macintosh.

1. Follow steps 1 to 4 of the CAMEDIA Master installation procedure. Double-click the appropriate

language icon.

2. The Acrobat Reader 4.0 installation window appears. Follow the on-screen prompts to continue

installing the program. We recommend using all of the suggested settings.

3. A message will appear when the installation is successful. Click Quit.

d. Reference Manual

The complete Reference Manual for your camera is available on the CAMEDIA Master 4.0 CD. This

manual contains full information on the usage and functions of your camera. Adobe Acrobat Reader

must be installed to view this document. The Reference Manual can be viewed on screen or printed.

To access the Reference Manual:

1. Follow steps 1 to 4 of the CAMEDIA Master installation procedure.

2. Double-click the "Reference Manual" folder and then double-click the appropriate language icon.

e. Installation completion.

1. After you have completed installing the programs and viewing the documentation, you may

remove CD. Store the disc for future reference.