Olympus CAMEDIA C-765 Ultra Zoom Manual de início rápido

Procurar online ou descarregar pdf Manual de início rápido para Câmara digital Olympus CAMEDIA C-765 Ultra Zoom. Olympus CAMEDIA C-765 Ultra Zoom 2 páginas. Olympus corporation camcorder/digital camera quick start guide
Também para Olympus CAMEDIA C-765 Ultra Zoom: Manual básico (41 páginas)

Imprimir página

Olympus CAMEDIA C-765 Ultra Zoom Manual de início rápido

1AG6P1P2056--

QuickStart Guide

C-765 Ultra Zoom

START HERE

It is strongly recommended that you follow these step-by-step

numbered instructions to set up and quickly begin using your

new Digital camera.

For more detailed instructions on advanced features, please refer to

the printed Basic Manual included in your package, or the Reference

Manual on the CD-ROM.

PREPARING THE CAMERA FOR USE

Before you begin using your Olympus Digital camera...

Charging the battery (LI-10B)

The battery is not fully charged when purchased. Before use, be sure

to charge the battery with the specified provided charger (LI-10C).

Make sure that the + and - terminals of the battery shown in the

illustration on the right are correctly oriented when loading the

battery into the charger.

Inserting the battery and xD-Picture Card

1) Make sure the camera is turned off.

• The monitor is off.

• The viewfinder is off.

• The lens is not extended.

TURNING ON THE CAMERA

The camera Mode dial is used to select the various operation modes.

Turning the camera ON

• Press the tabs on the lens cap to remove it.

• Set the mode dial to h. Press the power switch. The lens extends and the monitor turns on.

• To turn the camera off, press the power switch again.

TIP

:To maximize battery life, the built-in power-saver operates, and the camera enters sleep mode after approximately three (3)

minutes of non-use.

Setting the Date and Time

Set the date and time before using the camera for the first time. This affects the way image file names are

created, and will conveniently include this information with each picture.

• Set the mode dial to P and press the power switch to turn the camera on.

• Press e. The top menu is displayed.

• Press d on the arrow pad to select MODE MENU.

• Press ac to select the SETUP tab, then press d.

• Press ac to select X, then press d.

• Use ac to select the date format.

• Adjust the date and time in the appropriate fields by using d to select the field, and ac to set the proper value.

Repeat this step until all date/time fields have been set.

Note: Time is entered using the 24-hour format.

• Press

twice to set the date and time and exit the menu.

Camera Diagram and Controls

Now take a moment to familiarize yourself with the key areas of camera controls by reviewing the illustrations.

Strap eyelet

Zoom lever

VT825201

OLYMPUS AMERICA INC.

Two Corporate Center Drive, Melville,

NY 11747-3157, U.S.A.

http://www.olympusamerica.com/support

Connection terminals

2) Slide the battery compartment/card cover in the

direction of A. The lock is released, and the

battery compartment/card cover opens in the

direction of B.

(SHOOTING MODE)

Power switch

Mode dial

(OPTIONAL)

Shutter

Flash

button

Self-timer lamp

Lens

Microphone

UNPACKING THE BOX CONTENTS

Gather your digital camera and the parts as shown in the illustration. You'll need these to complete the steps for the camera

set-up procedures that follow.

Digital camera

Strap

AV cable

Basic manual

The following items are also included in the Digital camera package: lens cap & string, warranty card, registration card (not provided

in some areas), and safety precautions booklet.

3) Orient the battery correctly, and insert it until it

is locked by the battery lock.

• To remove the battery, slide the battery lock in the

direction of the arrow. As the battery emerges,

hold it straight and pull it out completely.

Battery lock knob

Lithium ion battery

5) Close the battery compartment/card cover in

(LI-10B)

direction C then slide it in direction D.

Attaching the strap and lens cap string

Attach the lens cap string and strap to the strap eyelets on each side of the camera as

illustrated. Attaching the strap to the camera makes it easier to handle.

Connector

DC-IN jack

cover

USB

connector

Note: Depending on the camera settings, not all indicators will be displayed.

A/V OUT jack

Olympus Europa GmbH

Wendenstrasse 14-18,

20097 Hamburg, Germany

http://www.olympus-europa.com

Lithium ion battery

Lithium ion battery charger

(LI-10B)

(LI-10C)

CD-ROM/Installation guide

4) Face the card the correct way and insert it into

the card slot.

• To remove the card, push the card all the

way in to unlock it. As it emerges, hold the

card straight and pull it out.

Contact area

AE Lock/Custom button

Self-timer button

Rotation button

Erase button

Flash mode button

Protect button

Diopter adjustment dial

Viewfinder

Monitor

Power switch

Monitor button

Tripod socket

Camera Settings in Shooting Mode as shown in Monitor

Exposure compensation

Shutter speed

Exposure differential

Shooting mode

Aperture value

F2.8

Battery check

Green lamp

ISO100

Flash stand-by

Macro mode

Noise reduction

Flash mode

Flash intensity control

Drive

Self-timer

Sound record

2288 1712

Record mode

AF target mark

Resolution

Camera Settings in Playback Mode as shown in Monitor

Print reservation

Number of prints

Battery check

Switch frame

2288 1712

Aperture value

Shutter speed

ISO100

'04.06.17 15:30

http://www.olympus.com/

USB cable

xD-Picture Card/Card manual

Notch

Flash button

Card access lamp

QUICK VIEW button

Arrow pad

OK/Menu button

Battery compartment/

card cover

AE lock

AE memory

Spot metering

ISO

White balance

White balance adjustment

Saturation

Sharpness

Contrast

Memory gauge

Number of storable

still pictures

Sound record

Protect

Record mode

Resolution

Exposure compensation

White balance

ISO

Date and time

File number, Frame number

Playing time/total recording time

Printed in Japan