Olympus CAMEDIA D-490 Zoom Início rápido - Página 2

Procurar online ou descarregar pdf Início rápido para Câmara digital Olympus CAMEDIA D-490 Zoom. Olympus CAMEDIA D-490 Zoom 2 páginas. Olympus camedia d-490 zoom: quick start
Também para Olympus CAMEDIA D-490 Zoom: Especificações (2 páginas)

Imprimir página

Olympus CAMEDIA D-490 Zoom Início rápido

World Leaders in Film and

Filmless Photography

Go...and Start Taking Pictures

Now you're ready to take great pictures with the D-490 Zoom.

1. With the lens barrier open and monitor on, press the Menu button

picture settings you want to adjust. This button is located next to the monitor.

Once you've selected the item, use the Arrow pad to make your adjustments.

2. Press the OK button

to confirm each setting from the following modes:

EXPOSURE COMPENSATION:

Adjust using

on the Arrow pad to brighten a dark situation or

mostly bright scene .

SPOT METERING:

Choose Spot metering to obtain the right subject exposure regardless of the

backlighting, or use the standard ESP system.

RECORD MODE:

Choose an image resolution setting: Standard

SHQ

modes

. To select

SHQ-TIFF

SQ-HIGH

Arrow pad for two seconds while in SHQ or SQ mode respectively. The amount of

frames you can store in any SmartMedia card depends on the resolution setting

you've selected. See the chart below:

Approximate number of storable still pictures

Record mode Card/Resolution

2MB

4MB

8MB

16MB 32MB 64MB

SHQ-TIFF

1600 x 1200

SHQ

1600 x 1200

640 x 480

165

SQ-HIGH

640 x 480

Approximate number of movie shooting seconds remaining

SmartMedia capacity

Record mode

Resolution

2MB

4MB

8MB

320 240

104

160 120

WHITE BALANCE:

Control your light settings to match shooting conditions: Auto

Daylight

, Overcast

, Tungsten

ISO SENSITIVITY:

ISO

These settings are equivalent to film speed settings. Select from AUTO, 100, 200 or

400. The higher the ISO setting, the faster the shutter speed that can be used and

the lower the amount of light required. With AUTO, the sensitivity increases

automatically in low-light situations.

DRIVE:

This item in the shooting menu allows you to switch from single shot to motor-drive

function. Select "SEQUENCE" to shoot up to 45 consecutive stills simply by

continually depressing the shutter release button.

FUNCTION SHOOTING:

SHOOTING MOVIE PICTURES:

To take movie pictures (15 frames/second), select

and use it to set up the shot. Fully press and release the shutter release button

to start or stop shooting. Shooting also stops when the memory gauge is

temporarily full.

Taking Pictures with Your Olympus D-490 Zoom

CARD FUNCTION:

Select

cards. Use the arrow pad to indicate the direction you are going to shoot. Shoot

to select the

successively, carefully overlapping the edges of each shot. Assemble with

CAMEDIA master 2.0 software.

SHARPNESS:

NORMAL or SOFT sharpness can be chosen. The SOFT setting is ideal for processing

images on a computer.

to darken a

FILE NAMING:

FILE

A file numbering system can be especially useful when downloading data to a computer.

Select AUTO FILE for sequential numbering of each card used; select NAME RESET to

have numbers reset every time a new card is inserted into the camera.

BEEP SOUND:

Select either ON or OFF to either hear or mute the setting confirmation sounds.

SETTINGS:

or one of the High Quality

You can save and reset settings.

, press and hold

on the

3. For a telephoto or wide-angle shot, use the 3X zoom lever at the top of the camera.

Push the lever toward "T" to choose telephoto shooting; pull it toward "W" to choose wide-

angle shooting.

4. When the flash is needed, the orange lamp next to the viewfinder blinks. Simply flip up

the flash and half-press the shutter release button until the orange light goes off. When it

File Format

comes on again, the flash is charged. Choose from Auto-Flash for automatic flash firing; Red-

SHQ

Eye reduction Flash

Uncompressed

flash activation; Slow Sync

TIFF

reduction)

SHQ Min. JPEG

Compression

5. Choose Macro

HQ Std. JPEG

2.5x

to make your subject appear twice as close. Choose the Panorama Mode

128

Compression

lock exposure, utilize panorama guides and flag images in the camera for panorama pictures.

331

665

SQ-Normal Quality

6. Point and Shoot. Take pictures using the optical viewfinder or use the monitor as your guide.

132

266

SQ-High Quality

To use the color monitor, open the lens barrier, turn on the monitor, then...

• Compose your subject.

16MB

32MB

64MB

• Half-press the shutter release button.

193

• The green lamp goes on.

211

424

851

• The exposure and focus will be adjusted.

• Full-press the shutter release button to take the picture.

• A short beep indicates the shot has been taken.

AUTO

• When the green lamp goes off, you're ready to take the next picture.

or Fluorescent light

Note: For QuickFocus overrides, on the Arrow pad press and hold the

and

Enjoy Your Pictures

With the D-490 Zoom, you can easily view, save and download the photos you want—and

delete the ones you don't want.

Viewing Pictures

• After you've taken a picture, close the lens barrier and turn on the monitor to enter playback

mode. Your picture will appear on the screen within seconds. Or, to quickly jump between

playback and shooting modes, simply press the monitor button

To switch back to playback mode, quickly press the monitor button

• To review all the pictures stored in the SmartMedia card, close the lens barrier and turn on the

monitor. Use

Keep the monitor on

SmartMedia card.

• To review movie pictures, first display the movie you want to see on the monitor. If it is currently

displayed, just press the OK button

theshooting menu, select the movie to be reviewed, and reactivate the playback menu. Go to

, set to Start and press the OK button

to take panorama pictures with standard Olympus-brand SmartMedia

to reduce the phenomena of red-eye; Fill-In Flash

for night photography;or Slow Sync (plus Red-Eye

to photograph people at night and/or with dark backgrounds.

for close-ups of subjects. Use Digital Telephoto Mode

1.0x

for 8 ft /2.5 m while pressing the shutter release button.

twice in rapid succession.

again.

on the Arrow pad to scroll through each of the pictures saved on your

. If not, press the menu button to shut down

. After a few seconds the movie will begin.

Still Having Problems with Your

Olympus Camera?

Call 1-888-553-4448 for Technical Support

• You also can view these pictures through any video source, such as a video or TV

monitor that has standard video input NTSC capabilities. Simply connect the D-490

Zoom to the "video in" jack of your video device using the video out cable included with

your camera.

Avoiding accidental erasure

• To lock a picture, you must be in playback mode. Notice the Lock

back of the camera. Press this button while the image you want to lock is displayed on

the monitor.

The lock icon will appear on the screen.

Deleting Pictures

• To delete a picture, advance to the desired image, press the Erase button

press

on Arrow pad to select the delete operation. Confirm and delete the image

by pressing the OK button

. When you delete a picture you've instantly freed up

space on your SmartMedia card for more pictures. So with the D-490 Zoom, there's no

more wasted film or developing costs for pictures you don't really want.

Note: A locked image cannot be deleted. Simply unlock the picture and repeat the

process.

Printing Pictures

• Store printing data in the SmartMedia card (using Card-Print) and make desired prints

using a printer or a lab that supports the Digital Print Order Format system. Since the

print order is already written in the card, you do not have to make orders at the lab.

for forced

Downloading Pictures

• Please refer to your Olympus Digital Camera Instructions Manual for easy-to-follow

instructions on how to install the enclosed software titles that will enable you to

1.6x

2.0x

download, view, edit, manipulate and store images on your computer.

Optional Accessories

For even more photographic creativity and enjoyment, Olympus offers a variety of optional

for infinity focus

accessories for use with your D-490ZOOM Filmless Digital Camera

• NiMH rechargeable batteries and Rapid Recharger for long-lasting power.

• AC adapter (C-7AU) to ensure a consistent power supply when downloading images..

• Photo Printers for Olympus Digital Cameras. • 1.45X Telephoto Lens (150mm equivalent)

• Additional SmartMedia Cards in 8MB, 16MB, 32MB and 64MB Sizes

• B-300 Telephoto Lens (180mm equivalent) • MAUSB-1 USB Reader/Writer

• Carrying Case • MA-2 PCMCIA Card Adapter • Accessory Kits

• MF-2 FlashPath Floppy Disk Adapter • B-28 Wide Angle Lens (28mm equivalent)

• FL-40 Extension Flash • FL-BK01 Grip • FL-CB01 Cable

• For best results with your inkjet printer, use the Olympus CAMEDIA/Pictorico branded

papers.

For more information, visit us online at www.olympus.com/digital, call 1-888-553-4448 or

contact your local authorized Olympus digital camera dealer.

Olympus is the registered trademark of Olympus LTD. Tokyo

All other trademarks and registered marks contained herein are recognized as property of their respective holders and are

hereby acknowledged.

symbol on the

and then