Olympus DP-201 Instruções

Procurar online ou descarregar pdf Instruções para Gravador de voz Olympus DP-201. Olympus DP-201 2 páginas. Gravador de voz
Também para Olympus DP-201: (Inglês) Instruções (2 páginas), (francês) Mode D'emploi (2 páginas), (Portuguese) Manual (2 páginas)

Imprimir página

VOICE RECORDER

DP-201

NOTE CORDER

INSTRUCTIONS

Thank you for purchasing an Olympus Digital Voice Recorder.

Please read these instructions for information

about using the product correctly and safely.

Keep the instructions handy for future reference.

To ensure successful recordings, we recommend that

you test the record function and volume before use.

Shinjuku Monolith, 3-1 Nishi-Shinjuku 2-chome, Shinjuku-ku, Tokyo 163-0914, Japan.

Tel. +81 (0)3-3340-2111

http://www.olympus.com

3500 Corporate Parkway, P.O. Box 610, Center Valley, PA 18034-0610, U.S.A.

Tel. 1-888-553-4448

http://www.olympusamerica.com

For customers in North and South America

USA RFI:

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Canadian RFI:

This digital apparatus does not exceed the Class B limits for radio noise

emissions from digital apparatus as set out in the Radio Interference

Regulations of the Canadian Department of Communications.

Cet appareil numérique ne dépasse pas les limites de Catégorie B pour les

émissions de bruit radio émanant d'appareils numériques, tel que prévu

dans les Règlements sur l'Interférence Radio du Département Canadien

des Communications.

Introduction

•

The contents of this document may be changed in the future without advanced

notice. Contact our Customer Support Center for the latest information relating

to product names and model numbers.

•

The screen and recorder illustrations shown in this manual were produced during

the development stages and may differ from the actual product. The utmost care

has been taken to ensure the integrity of the contents of this document. In the

unlikely event that a questionable item, error, or omission is found, please contact

our Customer Support Center.

•

Any liability for passive damages or damage of any kind occurred due to data loss

incurred by a defect of the product, repair performed by the third party other

than Olympus or an Olympus authorized service station, or any other reason is

excluded.

U1-BS0952-01

TR1111

Getting started

Insert batteries.

Turn on the power.

Slide the POWER switch to ON.

• Be sure to remove the protective film on the display before using this product.

To turn off the power:

While the recorder is in the stop mode, slide the POWER switch to

```

OFF/HOLD.

Power save mode:

If no operations are performed for more than 10 minutes when the

Strap eyelet

power is on, the display automatically turns off and the recorder enters

• A strap is not supplied with this product.

the power save mode. To exit the power save mode, press any button.

Battery indicator:

HOLD:

If [

] is displayed on the screen, replace batteries as soon as possible. If the

If sliding the POWER swich to OFF/HOLD while the recorder is in

] and [Battery Low] are displayed and then

battery level becomes too low, [

operation, all buttons and switches are disabled without interrupt-

the recorder automatically turns off.

ing the current operations.

You can

Set the time and date.

change the

recording

• The [Set Time & Date] screen appears when you use the recorder for the first time or when the recorder is turned on after more

mode!

than 30 minutes without power supply.

• If the time and date are not set, the time and date of the default settings are recorded to files .

Recording

Recording indicator lights while recording.

Current date

Recording mode indicator

Microphone sensitivity indicator

Total number of recorded files

for the date

Current file number

Elapsed recording time

Remaining recording time

Pause

To pause recording, press the REC ( ) button while

recording. To resume the recording, press the REC ( )

button again.

• Recording is automatically stopped if 60

minutes elapsed after recording is paused.

Protective film

"Setting time and date" (Verso)

Microphone sensitivity

High

Turn the microphone

toward a sound source to

be recorded.

Highly sensitive mode which can record surround-

ing noises (

)

Low

Standard sensitivity

(

)

Select the sensitivity according to the surrounding conditions.

"Changing the recording mode" (Verso)

• To ensure successful recordings, we recommend you to test recording with the selected

functions and volume beforehand.

• To ensure recording from the beginning, start recording a sound source after the

recording indicator lights.

• The recorder cannot record if [Memory Full] or [Maximum File Size is reached] is

displayed. Delete unnecessary files to free up some space in memory.

• If the recorder is placed directly on a table, the vibrations of the table are likely to be

recorded. To record sound clearly, place a notebook or handkerchief between the

recorder and the table to prevent the vibrations from being recorded.

• When the available recording time becomes less than 60 seconds, the recording

indicator starts flashing. The indicator flashes faster if the available time decreases to 30

seconds and to 10 seconds.

Playback

Recording date

Current file number

Elapsed playback time

Playback position bar indicator

Approximate file length

Forwarding and Rewinding

Press and hold

s To fast-forward or rewind a file, press and hold 0 or 9 button while playing

back a file.

s To skip to the next file or previous file, press 0 or 9 button.

s Fast-forwarding or rewinding continues to the next file.

sWhen searching for a file recorded on October 15.

File search

```

Search for files

by the date they

were recorded.

Recorder status

indicator

: During playback

: During fast playback

: During slow playback

The date display

Select October 15.

appears.

Recorded files are

grouped by date.

Changing the playback speed

Fast

Playback speed is changed

between 0.5x, 0.75x, normal,

1.2x, 1.5x, and 2.0x by each

press of the buttons.

Slow

Noise cancel

Noise is reduced when

played back to achieve

better sound quality.

Off

Noise Cancel indicator

The file is played back as it

was recorded.

• When the NOISE CANCEL switch is set to ON, playback

speed returns to normal.

When an earphone is connected, the speaker is turned

off. Playback sound for an earphone is monaural.

Volume

To avoid irritation to the ear, turn down

the volume before inserting an earphone.

High

Low

Do not raise the volume too high when

using an earphone. It may cause hearing

impairment and a decrease in hearing

ability.

• An earphone is not supplied with

this product.

```

When the recorder is in

stop mode, press and

hold the STOP ( ) but-

The first file is

If the file is skipped,

ton to display the [Time &

played back.

the recorder plays

Date] and [Remain].

back the next file.