Olympus WS-210S Manual de instruções - Página 3

Procurar online ou descarregar pdf Manual de instruções para Gravador de voz Olympus WS-210S. Olympus WS-210S 11 páginas. Enregistreuer voval numerique
Também para Olympus WS-210S: Manual de instruções (15 páginas), (Inglês) Instruções (15 páginas), (francês) Mode D'emploi (15 páginas)

Imprimir página

Recording

. . Recording

Current folder

ISTI

HQ.

olmJ

\!pHI

i1J

I )

I:lUG

Current folder

@ Current recording

mode

Current file number

Recording time

Remaining recording

time (Remain)

Record level meter

c'lu:

®-+

Rem. i n 22h52m46s

1ST'

olmJ

.--.. I...

£I

~2n

U/2G

2 :

<D-tWIDIWIID111

Press the

(REC) button to start recording.

The record/play indicator light turns red, and

recording starts.

elf you start recording after inserting the

earplione into the earphone jack on the

recorder, you can hear the sound being

recorded. The sound volume on the

recording monitor can be adjusted by

pressing the VOL

(+)

or VOL (-) button.

Press the

(FOLDER) button to choose a

folder.

Press the

(STOP) button to stop recording.

New recordings are saved as the last file in the folder.

The recorder provides five folders,

fl't fiJ f!l1!J lEI·

To change the folder selection, press the O(FOLDER) button while

the recorder is stopped. Each recorded file is stored in a folder. Using

folders to classify files makes it convenient to find files you want to

access later. Up to 200 messages can be recorded per folder.

•

Notes on the Folders

•

Power Supply

Slide tlleH.OLD

a~wlt~h

;In,:

th~ ~Ir.ctlon

0Jl,poalte t.!lat

In~!catedl;lyth.

arrow.;

'.~~'

.. .'

. -, :,

Power O.N

The:dlsplay

WilfAlJin'

orrand

the power will

be MnM on,

The

resume

luilCtiOri'

will brin$l tfie

recol'd8f baG!<.l()

the

stop

positio~ i.runemOrv~before

power was'turned off! '

·t

SIIJift

HOLD

awltchln the

d!.reCtion.~ndlcated

.th,l~

arrow Wh!Ie'tI18

nM:Qrderia

n0tJlI

Operatlon:~'

,t;;;.}

Power OFF ~~1"he

dlsplay

~uts

Off aildthejl9\yer

will betumed

off.

TheT~suri1efuriqtion

remembers

the~

stop

~ition

before the

po"!'er is tU'1:!ed oU.· .

~...~

' f

' . ,

HOLD switch

Standby Mode and Display Shut

Off

If the recorder is stopped for

minutes or longer during recording or playing, it goes

into Standby (power-save) mode, and the display shuts off. To exit Standby mode and

turn on the display, press any button .

Setting the HOLD switch to the direction of the arrow holds the current status, and all

button operations are disabled. This feature is useful when the recorder is carried in a

handbag or pocket. Remember to release the HOLD switch to use the recorder.

Notes

e Setting the HOLD switch to the direction of the arrow during playback will turn off the

display at the time when playback of the current file ends.

e Setting the HOLD switch to the direction of the arrow during recording will turn off the

display and finish recording at the time when the remaining recording time reaches to

zero.

. . Hold

. . Setting Time/Date (Time & Date)

If you have set the time and date, information as to when a sound file was recorded is

stored automatically with that file.

... To Pause Recording

When using the recorder for the first time, or after the battery has been taken out for

a log period of time, the "year" indication will flash. In such a case, be sure to set the

time and date by following steps

through

described below.

eYou can choose between 12 and 24 hour display by pressing the

(DISP.) button

while setting the hour and minute.

e You can change the order of the date indication by pressing the

(DISP.) button

while you are setting the year, month, or day.

elf you leave the battery compartment disconnected from the recorder for a longer

period of time or if you remove the battery compartment repeatedly at short intervals,

you may have to reset the time.

'O'I. 5. 1'-1- 5. 1' - 1 '0'1- 1' - 1. 5 [}'']--,

(Example: June 14, 2007) _

audio i.npUI

terminal of

other deVices

•

Converting

plug adapter

of KA333

PresS-'a

o (R!=ch.

TiR!SUm&R~ral.ng ~

!AI

.'1"?4'i't

The external microphone and other devices can be connected and

the sound can be recorded.

eTo connect the recorder to an external device, use the optional

connecting cord KA333, and the stereo/monaural converting plug

adapter supplied with KA333.

eWhen the external microphone is connected to the microphone

jack of the recorder, the built-in microphone will not operate.

eWhen connecting an external microphone or other external

equipment to the microphone jack, choose adequate eqUipment,

such as a mono microphone (optional).

Notes

• " "Folder FULL" or "Memory FULL" appears on the display, you cannot record. In such a case,

erase unnecessary files or download to PC.

• If the recorder is placed directly on a table when recording a meeting, it tends to pick up table

vibrations. Put a notebook or other item between the 1able and the recorder for clearer recording.

• Even if you press the

(DISP.) bUllon, the display will not change to current recording time if

the remaining recording time is 1 minute or less.

• A beep will sound when remaining recording time reaches 60 seconds, 30 seconds, and 10

seconds while recording.

• When remaining recording time is less than 60 seconds, the record/play indicator light starts flashing

in red. When the recording time is decreasing to 30 or 10 seconds, the light flashes faster.

• The recorder will enter Stop mode if it has been left paused for 60 minutes or longer.

• In case of difficult acoustic conditions or low speaker's voice, recording in Stereo XQ, Stereo

HQ, Stereo SP or HQ is recommended. Also, usage of an external microphone (sold separately)

could improve the quality of recordings.

• The input level cannot be adjusted on this recorder. When you connect the recorder to an external

device, execute a test recording and adjust 1he output level of the external device.

. . Recording from External Microphone or Other Devices

',07,

1AM12:oo

, 07.

14P~

3:00

~. Time & Date ~

Press the

(MENU) for more than 1 second to

enter the main menu, and press

select "Sub Menu", then press

Press the

to select the "Time &

Date", and press@.

Press the

button to select the item

to set.

Select the item from "year", "month", "day", "hour"

and "minute" with a flashing point.

Press the

or - button to set.

Follow the same steps by pressing the

button to elect the next item, and press the

or-

button to set.

Press the

button to complete the setup

screen.

The clock will start from the set date and time.

Press the

button according to the time signal.

Press the

(STOP) button to close the menu mode.

This completes the time/date setup procedure.

-4-

-5-