Olympus BX3M-HS Manual de instruções - Página 28

Procurar online ou descarregar pdf Manual de instruções para Microscópio Olympus BX3M-HS. Olympus BX3M-HS 44 páginas. Control box/fm control box

Imprimir página

: Turns ON.

: Blinks.

Number

of beeps

e) The system cannot be controlled by PC.

None

:Turns OFF.

: Varies depending on state.

Phenomena

–

Cause

MIX

The interface cable

Connect the interface cable.

is not connected.

The main switch is

Close the application software.

set to

(OFF) while

Then, set the main switch to (ON)

the communication

and start the application software.

between PC and

the microscope is in

process.

The device driver

Install the device driver from the

installation media of the application

is not installed.

software.

The device is not

Scan the device again with the

–

detected properly.

Windows

The USB cable is

Install the device driver in

connected to the

accordance with the installation

USB connector of

wizard.

PC for the first time.

The

Remove the interface cable from PC

communication

and connect it again. Then, restart

between the

the application software.

control box (BX3M-

If the communication is still not

CBFM or BX3M-

restored, turn OFF the power

CB) and PC is

supplies of the microscope and PC

disconnected.

and turn ON again.

Remedy

device manager.

Page

–