Olympus bx40 Manual de instruções - Página 3
Procurar online ou descarregar pdf Manual de instruções para Microscópio Olympus bx40. Olympus bx40 33 páginas. Replacement illuminator
Também para Olympus bx40: Instruções de instalação (4 páginas)
) Safety Symbols )
The following Symbols are found on the microscope. Study the meaning of the Symbols, and always use the equipment
in the safest possible manner.
Indicates that the surface becomes hot, and should not be touched with bare hands.
Before use, carefully read the instruction manual. Improper use could result in personal
injury to the user and/or darnage to the equipment.
Indicates that the main switch is ON.
Indicates that the main switch is OFF.
Warning engravings/stickers
are placed at Parts where special precaution is required when handling and using the
microscope. Always heed the warnings.
Warning engraving Position
Lamp socket
[Warning against high temperaturel
Warning sticker Position
Microscope frame rear Panel
[Warning against high temperaturel
Should warning stickers become soiled, peel off, etc. contact Olympus for replacements.
a
GetZing Ready
1. A microscope is a precision instrument.
Handle it with care and avoid
subjecting it to sudden or severe impact.
2. DO not use the microscope where it is subjected to direct sunlight, high
temperature
and humidity, dust or vibrations. For operating conditions,
refer to Section 6, "SPECIFICATIONS"
on page 21.
3. When moving the microscope, carefully carry it with both hands by grasping
the arm as shown in the figure on the left. (Weight: approximately
12.5 kg
(28 Ib.)
J, Darnage to the microscope
may occur if you grasp it by the Stage,
coarse adjustment
knob, or binocular
section of the Observation
tu be, etc.
4. The 5x40 tan be used with up to two intermediate attachments
(e.g., a
U-CA magnification
changer
and/or U-EPA eyepoint
adjuster).
For
restrictions when using additional intermediate attachments,
make sure
to read the instruction manual provided with the respective intermediate
attachments.