Olympus bx40 Instruções de instalação - Página 4
Procurar online ou descarregar pdf Instruções de instalação para Microscópio Olympus bx40. Olympus bx40 4 páginas. Replacement illuminator
Também para Olympus bx40: Manual de instruções (33 páginas)
Imprimir página
4
Replacement Illuminator Installation Instructions - Olympus BX40
B
A
NOTE - This photo shows the older R1 cable, which was came out of the illuminator assembly and plugged into the pot
plate. The new R2 cable comes attached to the pot plate and plugs into the bottom of the illuminator.
(No microscope was available for photos of the installation with the new cable)
4
Copyright 2017 Nanodyne Measurement Systems. Document authorized for installation of Nanodyne equipment only.
3
Photo with old cable - new cable shown on sheet 3.
3
2
2
1
3
Replace the back cover of the microscope.
Install PN 10736 rubber plug into the AC power recepticle to deter
application of obsolete and potentially dangerous voltage to the
microscope.
Plug in the power supply and the installation is complete.
Han-Seung Yang
PN 10450 Olympus BX40
Illuminator Installation Instructions
2
1
B
A
10/30/2017
REV
3
4
4
SHEET
OF
1