Olympus BX45 Manual de instruções - Página 33

Procurar online ou descarregar pdf Manual de instruções para Microscópio Olympus BX45. Olympus BX45 40 páginas.

8-2 Detailed Assembly Procedures

Fig. 38

...

†

Fig. 39

Installing the Bulb

Use only the designated bulb 6V30WHAL (PHILIPS 5761).

1. Holding the bulb @ with gloves or a piece of gauze, insert the bulb pins

² straight and fully into the pin holes ³ on the lamp socket.

# To prevent reduced bulb life or cracking, do not touch the bulb with

bare hands. If fingerprints are accidentally left on the bulb, wipe the

bulb with a soft cloth.

2. Aligning the guide pins | with the guide pin holes ƒ at the rear of the

microscope frame, and the plug ... with the socket †, gently push the

lamp socket all the way into place.

Caution for Bulb Replacement During Use or Right After Use

The bulb and the lamp socket are areas near these will be extremely hot

during and right after use.

Set the main switch to "

wall outlet, then allow the old bulb and lamp socket to cool before re-

placing the bulb with a new of the designated type.

Attaching the Objectives

Screw in the objectives into the holes of revolving nosepiece by begin-

ning with the lowest-power objective toward higher-power objectives.

}If you want to observe images of 10X and 40X objectives alternately,

attach them side by side.

(Figs. 38 & 39)

" (OFF), disconnect the power cord from the

BX45