Olympus BX51M Manual de instruções - Página 15

Procurar online ou descarregar pdf Manual de instruções para Microscópio Olympus BX51M. Olympus BX51M 36 páginas. System metallurgical microscope

3-4 Stage

Fig. 14

Fig. 15

Fig. 16

}The maximum load capacities are as follows.

· Stage:

· Stage plate: 500 g (U-SVRM/SVLM)

# Do not place a specimen which is heavier than above. Otherwise,

difficulty in stage movement or wear will result.

With the U-MSSP or U-MSSP4 Stage Plate

Place the specimen on the stage plate @ .

}The specimen should be parallel and planar. Otherwise, the reflected

light cannot reach the objective, rendering observation impossible.

}When observing very large specimens, remove the slide holder and place

the specimen directly on the stage.

[ U-SIC4R2/SIC4L2 Stage Only ]

Observation with the U-WHP2 Wafer Holder Plate (Fig. 15)

1. Place the BH2-WHR43 rotary wafer holder (for 3- or 4-inch) ² on the U-

WHP2 wafer holder plate @.

2. Place a 3-inch or 4-inch wafer on the BH2-WHR43 and observe the wa-

fer.

The wafer holder plate can be rotated with the knob ³.

[ U-SIC4R2/SIC4L2 Stage Only ]

Observation with the U-MSSPG Glass Holder Plate (Fig. 16)

}If the microscope is equipped with transmitted light illumination, trans-

parent specimens can also be observed.

1. Place the glass plate ² gently on the glass holder plate @.

2. Place a specimen or transparent specimen and observe it.

1.5 kg

1 kg (U-SIC4R2/SIC4L2)

BX51M