Olympus BX51M Manual de instruções - Página 31

Procurar online ou descarregar pdf Manual de instruções para Microscópio Olympus BX51M. Olympus BX51M 36 páginas. System metallurgical microscope

8-2 Detailed Assembly Procedures

Fig. 32

Fig. 33

†

Fig. 34

Attaching the Halogen Bulb

}The applicable lamp bulb is the 12V100WHAL-L (PHILIPS 7724) or the

12V50WHAL-L (LIFE JC).

1. Fully loosen the clamping screw @ at the top of the lamp housing using

the provided Allen screwdriver.

2. Remove the lamp housing ² by lifting it up.

3. Tilt the bulb socket ³ by 90° in the direction of the arrow.

4. While pushing down the bulb clamping levers | down, hold the halo-

gen bulb ƒ with gloves or a piece of gauze, insert the bulb pins ... into

the sections † as far as they will go.

Then return the lamp clamping lever gently back to the original position

to clamp the bulb.

!To prevent reduced bulb life or cracking, do not touch the bulb with

bare hands. If fingerprints are accidentally left on the bulb, wipe the

bulb with a soft cloth.

5. Fit the lamp housing from up and tighten the clamping screw @ by

applying downward pressure.

!Caution for Bulb Replacement During or Right After Use

The bulb, lamp housing and areas near these will be extremely hot

...

during and right after use.

Set the main switch to "

the wall outlet, then allow the old bulb and lamp housing to cool

before replacing the bulb with a new one of the designated type.

(Fig. 32 - 34)

" (OFF), disconnect the power cord from

BX51M