Olympus MX61 Manual de montagem - Página 7

Procurar online ou descarregar pdf Manual de montagem para Microscópio Olympus MX61. Olympus MX61 49 páginas. 200mm/300mm compatible semiconductor/fpd inspection microscopes

Imprimir página

MX61 external view, eye point and center of gravity

Eye point

(Bottom view of microscope)

(Note) The center of gravity is an approximate position when the microscope is equipped with the standard module

combination for transmitted light observation. Note that the position is variable depending on the weight of

specimen, position of the stage and other modules used.

9. To prevent toppling of the microscope system, keep the total height of the microscope below 1 meter (3.3 ft) when

attachments (including Olympus optional modules and the CCD camera prepared by the customer) are mounted.

Fig. 2

10. Each microscope has screw holes (M5, depth 10 mm) for prevention of

toppling (in the case of an earthquake or microscope imbalance) on the

side panels @ (x 2 holes) and the rear panel ² (x 2 holes). Clamp the

microscope using L-shaped clamps and these screw holes as required.

When clamping the microscope using L-shaped clamps pre-

pared by the customer, be sure to use steel bolts (strength cat-

egory 12.9) with as long as possible threaded sections (8 mm

or more is recommended).

MX61/MX61L

Unit: mm

Position of center of gravity