Olympus SZ51 Manual de instruções - Página 26

Procurar online ou descarregar pdf Manual de instruções para Microscópio Olympus SZ51. Olympus SZ51 28 páginas. Zoom stereo microscopes
Também para Olympus SZ51: Manual de instruções (28 páginas)

Imprimir página

Installation

# Before mounting, remove dirt and dust from the mount surfaces and handle carefully so as not to damage them.

Stage plate

Friction surfaces

Stage plate mount

hole

Operation

CAUTION

Do not touch the friction surfaces on the cup stage and seat with a hand. If the friction surfaces are contaminated,

wash with a neutral detergent before use.

# If a load of more than 20 grams is applied to the edge of the cup stage, it may move spontaneously.

# When a tall specimen is placed and the cup stage is tilted, the specimen may go out of focus. In this case, adjust

the focus again.

Specimen holder

mount hole

Cup stage

Seat

Fig. 20

Fig. 21

Fit the cup stage seat into the stage plate mount

hole of an applicable base.

Place the cup stage on the seat.

Before placing, wipe the friction surfaces on the

cup stage and seat with a clean cloth.

Mount the stage plate.

Mount the specimen holder.

}Clean the friction surfaces periodically.

Applicable base

Place a specimen on the stage plate, hold the cup stage by the edge,

and tilt the cup stage slowly. (Fig. 20)

}If the specimen slips on the stage plate, hold the specimen with the

provided specimen holder.

}To fix a container such as a petri dish, insert the provided tube into the

specimen holder to fix the container by pinching. (Fig. 21)