Olympus SZX-AR1 Ajuda do software - Página 36

Procurar online ou descarregar pdf Ajuda do software para Microscópio Olympus SZX-AR1. Olympus SZX-AR1 41 páginas.
Também para Olympus SZX-AR1: Manual de instruções (8 páginas)

Imprimir página

on the AR display to make adjustments so that the

AR image (a) matches the optical image (b).

･Press the AR image ON/OFF button to show and

hide the AR image repeatedly to check if the AR

image and the optical image match. For the

operation procedure, please refer to "Operation of

the AR Trinoculars" in the system manual.

⑦ Use the keyboard to operate. Press [1] on the

keyboard and make sure that the mouse cursor

appears on the software.

⑧ Use the mouse to operate. Click [Check the

adjustment result] in the [AR Display Adjustment]

tab. The camera picture window will appear on your

PC monitor screen.

⑨ Click on one of the four colored buttons displayed in

the lower right corner of the camera picture window,

then left-click and drag to draw a line at the location

to be marked. Look through the eyepiece and check

that the optical image as seen through the optical

barrel matches the marker line drawn in the camera

picture window.

Reference

If the marker lines are displayed out of alignment,

repeat steps ④ through ⑥ again.

⑩ Click [Close] in the lower right corner of the camera

picture window to close the window.

⑪ After completing the adjustment, click [Save] to save

the settings.

Adjustment of the zoom magnification sensor

■

① Enable clicking on the zoom handle.

For the operation procedure, please refer to "Setting

the zoom magnification sensor" in the system manual.

② Click [Setup].

③ Click [Adjustment of the zoom magnification sensor].

Reference

After connecting the zoom magnification sensor,

you will be able to check it.

④ Click [Edit].

⑤ Turn the zoom handle to the click position and click

[Get] for the corresponding magnification.

Reference

To ensure accurate magnification readings, do not

2　Others