Olympus U-LGPS Manual de instruções - Página 15

Procurar online ou descarregar pdf Manual de instruções para Microscópio Olympus U-LGPS. Olympus U-LGPS 24 páginas. Led and ldp light source

Operating Procedures

This section describes the basic operating procedures of each portion.

Set the main switch A on the back of U-LGPS to (ON).

· The pilot lamp B on the front of U-LGPS turns ON (green).

TIP

· The numeral characters or texts are displayed on the counter

D on the front of U-LGPS.

When using U-LGPS control software:

Turn ON the power of the PC (control PC) where software is installed,

and start the U-LGPS control software.

Press the lamp switch C on the front of U-LGPS.

· The color of the pilot lamp B on the front of U-LGPS turns to

TIP

blue.

· Pressing the lamp switch C allows you to select ON or OFF

of the lamp.

· You can check the status of the lamp by the color of the pilot

lamp. For details, see page 12.

Press the lamp switch C of U-LGPS.

· The color of the pilot lamp B turns to green.

TIP

· The cooling fan may keep working for cooling purpose.

When the cooling is finished, the cooling fan stops

automatically.

When using U-LGPS control software:

Turn OFF the power of the control PC.

Set the power switch A to

· The pilot lamp B on the front of U-LGPS turns OFF.

TIP

· The numeral characters or texts on the counter D on the

front of U-LGPS disappear.

When using U-LGPS control software:

Turn OFF the power of the control PC.

(OFF).

U-LGPS