Olympus U-RFL-T Manual de instruções - Página 4

Procurar online ou descarregar pdf Manual de instruções para Microscópio Olympus U-RFL-T. Olympus U-RFL-T 16 páginas.
Também para Olympus U-RFL-T: Manual de instruções (36 páginas), Manual de instruções (16 páginas)

Imprimir página

IMPORTANT

The U-RFL-T power supply for mercury burner is designed exclusively for Olympus lamp housing for 100

W mercury burner, and the U-RX-T power supply for xenon burner is designed exclusively for Olympus

lamp housing for 75 W xenon burner.

SAFETY PRECAUTIONS

1. Do not light the mercury or xenon burner while it is not mounted on the microscope. The UV rays in their light are harmful

to your eyes. Never look at the direct light output from the lamp housing.

2. Always use the lamp housing designated by Olympus for the power supply.

3. Make sure that the burner and connection cable are attached before setting the main switch of the power supply to " I "

(ON).

4. Do not attempt to disassembly the power supply because it includes high-voltage parts inside.

5. Always use the power cord provided by Olympus. If no power cord is provided, please select the proper power cord by

referring to the section "PROPER SELECTION OF THE POWER SUPPLY CORD" at the end of this instruction manual. If the

proper power cord is not used, product safety and performance cannot be guaranteed.

6. Always ensure that the grounding terminal of the wall outlet is properly grounded/earthed. If the equipment is not grounded/

earthed, Olympus can no longer warrant the electrical safety performance of the equipment.

7. Replace the burner when the hour counter on the power supply indicates the end of burner service life. Using a burner

after its life has expired may result in the burner burst.

8. The power supply has ventilation openings on both sides. Install the power supply by leaving a space of more than 10

cm on each side, and do not let a metallic object enter the unit through the openings (to prevent electric shock or

malfunction).

Safety Symbols

The following symbols are found on the power supply. Study the meaning of the symbols and always use the equipment

in the safest possible manner.

Symbol

Be careful against high voltage applied inside the unit.

Before use, carefully read the instruction manual. Improper handling could result in injury to

the user and/or damage to the equipment.

Indicates that the main switch is ON.

Indicates that the main switch is OFF.

Explanation