Olympus PT-022 Manual de instruções - Página 18

Procurar online ou descarregar pdf Manual de instruções para Acessórios para câmaras Olympus PT-022. Olympus PT-022 43 páginas. Underwater case

Removing the hot shoe cable cap

To perform TTL flash shooting when this case is used, connect the

hot shoe cable provided with the optional PFL-01 between the

connector on this case and the C-770 Ultra Zoom's hot shoe.

Turn the hot shoe cable connector cap inside

the case counterclockwise to remove it.

Insert the connector of the hot shoe cable into

the case's connector and turn the connector

screws all the way clockwise to connect them

firmly.

Insert the cable's hot shoe into the C-770 Ultra

Zoom's hot shoe.

When not using the hot shoe cable, attach the

hot shoe cable cap to the hot shoe cable

connector inside the case and turn the cap all

the way clockwise to attach it firmly.

CAUTION

: • Be sure to remove the camera from the case when

inserting the connector of the hot shoe cable into the

case's connector.

If the threaded sections of the TTL cable and TTL cable connector

stick to each other, the cable may disconnect from the connector. To

prevent this, apply O-ring silicon grease (provided with this case) to

the threaded sections.

For details, see the maintenance description on page E-33 of this

manual.

CAUTION

: • If you cannot disconnect the TTL cable, do not use

force to disconnect it. Contact Olympus for support.

E-17