Olympus PT-037 Manual de instruções - Página 25

Procurar online ou descarregar pdf Manual de instruções para Acessórios para câmaras Olympus PT-037. Olympus PT-037 43 páginas. Underwater case

Mount/remove the LCD hood

Mounting: Fit the projected sections of the LCD hood into the guides

above and below the LCD monitor window.

Removing: Separate the projected sections of the LCD hood from the

guides above and below the LCD monitor window by

expanding the LCD hood outwards.

Guides

Fit the lens cap onto the lens ring as

shown in the figure. Be sure to

remove the lens cap before

shooting.

After sealing the Case, check the sealing part of front and rear lid visually

to confirm that the O-ring is not twisted or out of the groove and that no

foreign matter has been caught. Also check that the Case is not broken or

cracked.

CAUTION:

Hairs, fibers, and other narrow items are not very apparent, but they may

cause entry of water. In addition, pay special attention to breaks and cracks

on the Case.

Mounting

Removing

EN 25