Olympus DIEGO ELITE Manual de configuração e operação
Procurar online ou descarregar pdf Manual de configuração e operação para Equipamento médico Olympus DIEGO ELITE. Olympus DIEGO ELITE 3 páginas.
Imprimir página
NEW DIEGO ELITE SYSTEM. WITH A TWO-YEAR MANUFACTURER'S WARRANTY.
Two surgeon-inspired ergonomics Multidebrider handpieces
Both Multidebrider handpieces meet the CSF requirements. They are compatible with automatic washer/disinfector machines as
described in the instructions for use (IFU) as well as with autoclave sterilization (see IFU).
1
Setup: Ensure the console and the optional suction module
are properly assembled onto an IV pole before use.
1.8 m
Setup with suction module
2
Power ON: When using
the Olympus suction
module (EGMDSM220V)
the suction is activated
using the console touch
screen.
Turn
suction ON
Turn the
console ON
SETUP AND OPERATION
QUICK-REFERENCE GUIDE
1.3 m
Setup without suction module
3
Attach tube set: When using
the declog tube set, be sure to
preassemble the pressure bulb
and tubing prior to starting the
procedure. Slide either tube set onto
the back of the handpiece. Listen for
the "click." Attach the blue suction
connection to the suction canister.
Two tube-set choices
Declog
Standard
4
Attach a blade or burr: Press
the two release buttons on
the sides of the handpiece to
secure it in place. The type
of blade or burr chosen will
determine the default factory
settings shown on screen.
Press (+) or (–) to adjust.
5
Connect accessories: Connect the handpiece. Connect
the grounding pad (if using a monopolar blade). Connect the
foot switch (red dot to red dot).
Connect foot pedal (red dot
to red dot)
6
Attach tubing to the suction source.
Release buttons
on either side
Connect
Connect
the hand-
the grounding
piece
pad (if using a
monopolar blade)