Axler QRP-601 Manual de início rápido - Página 6
Procurar online ou descarregar pdf Manual de início rápido para Acessórios para câmaras de vídeo Axler QRP-601. Axler QRP-601 8 páginas. Professional video monopod
Imprimir páginaV I D E O P A N H A N D L E
The handle can be used on either side of the fluid head and is
able to extend to allow for better camera handling.
1. Rotate the handle's twist lock clockwise to loosen.
2. Extend the handle.
3. Rotate the twist lock counterclockwise to tighten.
U S I N G T H E M O N O P O D F E E T
To reinforce stabilization, flip out the feet until they lock
into position.
The feet have an
integrated ballhead.
To move the monopod
on its vertical axis:
1. Loosen the pivot
locking wheel.
2. Use the hex key to
loosen the pivot tension
screw, located under the
rubber pad. If the ballhead
moves too easily, slightly tighten the tension screw
until you arrive at the desired ballhead tension.
3. Loosen or tighten the pivot locking wheel to adjust
the range of motion away from the vertical axis.
It is recommended to always keep a hand
on the monopod while in use.
To fold the feet, press each foot lock, and move
the feet to the folded position. This will expose the
rubber pad that you can rest the monopod on.
To remove the feet, use the hex key to loosen the foot set
screw, and then rotate the feet clockwise to unscrew them.
When detached, the feet can be used as a
tabletop tripod by attaching a tripod head.
To attach the alternate rubber pad, screw it into the base
socket and use the hex key to tighten the foot set screw.