Axmin UE-153DV1 Manual de operação - Página 5

Procurar online ou descarregar pdf Manual de operação para Serra Axmin UE-153DV1. Axmin UE-153DV1 18 páginas. Small band saw machine

Before Cutting

Fig. 1

Release the lock pin (A) in Fig.1 to free this saw.

After service, must relock in the pin to the saw

head properly for your safety and carry. Failure

to comply with the warning could result in

personal injury and machine damage

ATTENTION

Pump grease into the gear reducer every

week to lubricate the gears avoid gears got

high temperature when machine be used

continuously.

Choose super high-density grease.

Grease nipple located at rear of gear reducer.

Use grease gun pump in grease from grease

nipple.

Grease Nipple

2. The Quick Vise and Work Set

The vise is mounted on the machine base.

Follow the easy steps to open or close the vise.

1. Turn the handle (A) in Fig.2 counter

clock-wise to open the vise jaw to allow the

width of vise can load work piece.

2. Make sure the work piece is well located on

the table. Turn the handle (A) clock-wise to

close the vise jaw to clamp the work piece.

NEVER OPERATE SAW WITHOUT BLADE

GUARDS IN PLACE.

Raise saw head to proper position in Fig.3.

Open vise to accept the piece to be cut by

turning the hand lever to open the vise.

Place work piece on saw bed if the piece is

long, support the end.

- 3 -

Fig. 2

CAUTION !

Fig.3