Axminster 107699 Manual de instruções original - Página 8

Procurar online ou descarregar pdf Manual de instruções original para Torno Axminster 107699. Axminster 107699 17 páginas. Woodturning lathe

LATHE FOOTPRINT

SET-UP PROCEDURES

Operating Height

Postion the lathe on the work bench, make sure

the surface is level and free of clutter. Tip. The

correct operating height is 'Elbow Height to

Centres', Stand in front of the lathe and check

that your elbow is level with the drive and live

centres, see diagram.

Tailstock Barrel Adjustment

The tailstock incorporates three grab screws to remove

any play inside the barrel housing. Adjust the grub

screws in small increments until the barrel moves freely

without any excess play, see figs 07.

Distance between

centres 330mm

730mm

Banjo & tool

rest travel

400mm

Centres

Bench

Fig 07