Axminster AWSL Manual do utilizador - Página 10

Procurar online ou descarregar pdf Manual do utilizador para Torno Axminster AWSL. Axminster AWSL 20 páginas. Woodturning lathes

Parts Description and Identification...

A X M I N S T E R

W H I T E

Toolrest

Tailstock

On/Off switch

assembly

AWVSL (700241) ONLY

On/Off switch &

speed control

assembly

Spindle Speed

LCD

A stright stem with a shaped cast metal blade forming a 'T' profile. It fits

into the banjo, and is locked in position for height and approach angle

to support the turning tools being used on the workpiece.

This casting has a machined base which locates in the slot between and

sits across the two surfaces of the bed. There is a similar mechanism

(cam lift) to that fitted to the banjo to lock the tailstock in position. The

upper part of the casting carries the tailstock barrel, the centreline of

which is in line with the headstock centreline. The barrel can be

advanced or returned using the control wheel. The barrel can be held in

position using its lock (a lift and shift handled lever bolt) which pinches

the barrel in the casting. The barrel is bored to accept 2MT tools.

Standard on/off switch assembly, with 'I' indicating the on button and 'O'

indicating the off button. The switch is NVR.

This is a black box mounted to the side of the machine which is hinged

to one side to allow it to be moved to gain access to the pulley. It is

secured in place with a locking handle. Mounted on the box is a

standard on/off switch with 'I' indicating the on button and 'O' indicating

the off button. The switch is NVR. Above the switch is a Speed Control

Knob with the words "HIGH & LOW". It is connected to the circuit that

controls the spindle speed (650rpm Low to 3800rpm High). The

speed of the spindle is displayed on the spindle speed LCD mounted to

the headstock.

This is a Digital LCD mounted to the headstock which displays the

speed of the spindle.