Axminster 100714 Manual do utilizador - Página 3
Procurar online ou descarregar pdf Manual do utilizador para Ferramentas Axminster 100714. Axminster 100714 8 páginas. Single hinge jig
Imprimir páginaAxminster Single Hinge Jig
The Axminster Single Hinge Jig is designed to cut hinge recesses in combination with any size router fitted
with an appropriate guide bush. Using the suggested 26mm guide bush and 20mm cutter, the template will
cut recesses for 100mm and 50mm butt hinges. Using alternative cutter and guide bush combinations, it can
also be used to cut recesses for other size butt hinges and for 35 and 26mm circular boss style cabinet hinges.
The jig can be used for cutting the hinge recess into the edge of a door as well as into a door frame or carcase.
Quantity
1 No.
1 No.
2 No.
2 No.
1 No.
Carefully read and follow the router manufacturer's instruction book
to ensure that you are competent in handling and using the router.
Follow all safety procedures and regulations in respect of the use of
electric power tools.
Always wear suitable eye and ear protection as well as protection against dust
inhalation when using the router.
Attach the template to the stock using the two countersunk bolts, inserted through the countersunk slots in
the template face. Secure with the two star knobs.
WARNING! DO NOT OVERTIGHTEN AS THIS COULD DAMAGE THE TEMPLATE
Item
Clear plastic template
Box section aluminium stock
Countersunk hex bolts
Star knobs
Manual
(Note: clamp is not supplied with the kit)
General Instructions for Working Practise/Safety
Initial Assembly Instructions
3
Introduction
What's Included
100714
Code