Alphagrip SKR-4300UTO Manual do utilizador de início rápido - Página 2
Procurar online ou descarregar pdf Manual do utilizador de início rápido para Teclado Alphagrip SKR-4300UTO. Alphagrip SKR-4300UTO 3 páginas.
Imprimir páginab. One 10' USB cable
c. One desk stand
d. One pair of decals
2. The decals show you which characters, functions or commands are associated with
which back buttons. By affixing the decals on the lower front portions of the
SKR-4300UTO's handles (or on the top front portion on either side of the AlphaGrip logo),
you can find what you are looking for without turning the SKR-4300UTO over.
3. Connect the wider plug at the end of the cable into your computer's USB port and the
smaller plug at the other end of the cable into the smaller USB port located on the back
of the SKR-4300UTO below the larger rectangular USB port (the larger USB port is for
future SKR-4300UTO adapters).
4. At its core the SKR-4300UTO is a standard USB keyboard and trackball. If your
computer is a PC running Windows98 or greater, or a Mac running OS X,
it should automatically load the correct drivers and you should be able to
begin typing within a minute or two. If your computer is running Linux or
any other operating system, you must determine if and how your computer
can be configured to recognize a standard USB keyboard and trackball.
5. two buttons to the immediate left of the trackball are its left click (top) and right click
(button) buttons. The right click doubles as a middle click when pressed simultaneously with
a red shift key.
6. To avoid accidental activation of buttons, place the SKR-4300UTO into the desk stand when
not in use. You may also press the "Pause" button, located on the lower right front portion of
the SKR-4300UTO.
Press the Pause button a second time to re-activate the SKR-4300UTO.
7. IMPORTANT!! The SKR-4300UTO has 3 trackball speed settings which can be set by
generating anumber (by simultaneously pressing a red shift key plus the back that corresponds with the
number you wish to generate) while also pressing the capital shift as follows:
Shift + 1
250 DPI
Shift + 2
500 DPI
Shift + 3
1000 DPI
The default setting is Shift + 2 (500DPI). You can also adjust the speed of the trackball with the pointing
device settings of your computer's operating system. For maximum speed, uncheck or otherwise
disable the "enhance pointer precision" setting, or any similar setting, on your computer if applicable
8. Electrical Specification
Electrical Specification
Connector
USB Speed
Operating voltage range
Operating current
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
A "B"type connector for USB up stream port and
A "A"type connector for USB down stream port
Low speed(1.5Mbps)for embedded Function,
High speed(480Mbps)for Integrated USB Hub
DC 5 V
Max 500mA
0 ~ 40 ℃
-20 ~ 60 ℃
85% RH (non-condensing)
95% RH (non-condensing)