Alphalite CBW-4L Instruções de instalação - Página 3

Procurar online ou descarregar pdf Instruções de instalação para Lanterna Alphalite CBW-4L. Alphalite CBW-4L 3 páginas. Led curved-basket linear wrap luminaire

Imprimir página
Installation Instructions
LED Curved-Basket Linear Wrap Luminaire
Surface Mounting Installation Steps:
1. Remove the lens and Led module plate.
2. For mounting, using the provided mounting holes on each end of the fixture housing.
3. Make electrical connections according to code.
4. Install the lens by hanging from end plate pins of the luminaire and rotate into position.
Flex the lens to engage end plate pins on opposite side of the luminaire. See A for details.
CAUTION
1. Avoid direct eye exposure to the light source while it is on.
2. Account for small parts and destroy packing material, as these may be hazardous to children
3. Disconnect power and allow fixture to cool before changing bulb or handing fixture.
Wiring Diagram:
Black(Line)
White(Neutral)
120-277v
Green(Grd)
Dimming wire
to 0-10v IEC
compliant control
10715 Springdale Ave, Ste 4, Santa Fe Springs, CA 90670
C
0-10V Dimmable Wiring
Follow the wiring directions as in fig. 1.
1. Connect the black fixture lead to the (+)
LINE supply lead.
2. Connect the white fixture lead to the (-)
COMMON supply lead.
3. Connect the GROUND wire from fixture
to supply ground. Do NOT connect the
Lead wire to
GROUND of the dimming fixture to the
LED load
output.
4. Connect the purple fixture lead to the
(V+) DIM lead.
5. Connect the gray fixture lead to the (V-)
DIM lead.
Tel: 1-888-287-9228
l
C
A
ON-OFF Wiring
Follow the wiring directions as in fig. 1.
1. Connect the black fixture lead to the
LINE supply lead.
2. Connect the white fixture lead to the
COMMON/NEUTRAL supply lead.
3. Connect the GROUND wire from fixture
to supply ground.
Fax: 1-888-258-9183
l
l
2