Axon Body 2 Manual de início rápido - Página 2

Procurar online ou descarregar pdf Manual de início rápido para Estação de ancoragem Axon Body 2. Axon Body 2 2 páginas.
Também para Axon Body 2: Manual de início rápido (2 páginas), Manual de início rápido (2 páginas), Manual de dicas rápidas (6 páginas)

Imprimir página

Status LED

When you plug your camera into the Axon Dock, the Axon Body 2

camera status LED displays the camera's status.

Device Status

Initial connection (momentary)

In queue awaiting upload

Device ready (all videos uploaded successfully)

Device not assigned, agency mismatch, camera

set in the offline mode, or device error

Uploading data

Firmware update, internal battery charging,

extremely low battery, or memory full

Transfer error, device re-trying to transfer

Possible network error. Verify Axon Dock is

registered and refer to the Troubleshooting

chapter of the User Manual or go to

help.axon.com.

Axon Dock has no communication with the

camera. Verify the Axon Dock core and bays

are seated properly. Contact Axon Technical

Support if not resolved.

Notifications

The Axon Body 2 camera emits beeping sounds called audio prompts to notify you of the system status. These audio prompts usually occur after

you perform an action with the camera. The audio prompts are accompanied by vibrations that match the beeps.

Powering on or off

Recording an event

The device is ending an event and returning to BUFFERING mode

Low battery notifications:

•

Camera in BUFFERING mode and battery has power for 20 minutes or less

•

Camera in EVENT (recording) mode and battery nearly discharged (the

camera will shut down within a few minutes)

Camera memory is full (the camera will not record)

Camera internal clock is not set OR Error state*

*When the Operation and Function LEDs are also solid red.

Using Axon View

The Axon View application enables you to replay

video and add metadata (GPS, title, case ID, and

category) to your videos using a smart phone or other

smart device.

1. Using your smart device, search for and download

the Axon View application from the Play Store or

the App Store.

2. On your smart device, install and open the Axon

View application

3. F ollow the onscreen ins tr uc tions or go to

help.axon.com

for addiitonal information.

Note: All data is stored on the Axon camera. No videos are stored

on your smart device.

Bluetooth is a trademark of the Bluetooth SIG, Inc.; Play Store is a trademark of Google, Inc.;App Store is a trademark of Apple, Inc.; iOS is a trademark of Cisco Systems,

Inc.; and Windows is a trademark of Microsoft Corporation.

,  AXON, Axon, Axon Body 2, Axon Dock, Axon View, and Evidence Sync are trademarks of Axon Enterprise, Inc., some of which are registered in the US and other

Status LED

Solid red (for 20 seconds or

fewer)

Solid yellow

Solid green

Blinking red

Blinking yellow

Blinking red and yellow – DO

NOT remove the camera

from the Axon Dock

Blinking green and yellow

Blinking red, yellow, and then

green (cycling all colors)

LED off

Operating Mode

Recharging the Battery and Uploading Data

The Axon Dock is used to recharge the Axon Body 2 camera's battery

and upload data. If you do not have an Axon Dock, upload video

with a Windows compatible computer using Evidence Sync. For more

information about Evidence Sync, go to help.axon.com.

1. Ensure the Axon Body 2 camera is off.

2. Insert the camera into the Axon Dock with

the power switch down, as shown in the

image to t h e r ig h t . T h e A xon D o c k

automatically:

• Uploads data

• Deletes videos from the camera

• Updates camera firmware and settings

• Charges the camera battery

3. It is recommended that you wait until the

battery LED displays green before

removing the camera from the Axon

Dock.

DO NOT remove the camera if the status LED is blinking red

and yellow.

Audio Notification

One beep

Two beeps (every 2 minutes)

One long beep

Four quick beeps (every 20 seconds)

Three beeps

Five quick beeps (every 20 seconds )

Pairing an Axon Body 2 Camera with Axon View

1. Turn on the Axon Body 2 camera and wait until the camera boots

up.

2. Open Axon View, select a Body 2 camera and tap Initiate Pairing.

3. Hold down the Function and EVENT buttons for 5 seconds.

4. Wait until you hear four beeps. The Function LED will blink green.

5. On your smart device, follow the onscreen instructions.

MPC0205 Rev: H

Haptic Notification (Vibration)

Once

Twice (every 2 minutes)

Once, long duration

Four times, quickly (every 20 seconds)

Three times

Five times, quickly (every 20 seconds)