AlphaShield FIREWALL Manual do utilizador - Página 10
Procurar online ou descarregar pdf Manual do utilizador para Firewall AlphaShield FIREWALL. AlphaShield FIREWALL 19 páginas. Alphashield hardware firewall user's manual
Também para AlphaShield FIREWALL: Manual do utilizador (6 páginas)
Imprimir páginaThe first slide position selects the Manual Mode with an inactivity and logical
Disconnect timer value of 15 minutes. In this mode, your computer will retain the
current IP Address assignment from the Internet Service Provider (ISP).
The second slide position selects the Auto Mode with an inactivity disconnect timer value
that is infinite. There is no disconnection. In this mode, the AlphaShield Professional
Edition will retain the current IP Address assignment from the Internet Service Provider
(ISP). This is the recommended and default setting for AlphaShield Professional Edition.
The third slide position selects the Lock Mode with an inactivity and physical disconnect
timer value of 15 minutes. In this mode, your computer may release the current IP
Address assignment from the Internet Service Provider (ISP). This is an excellent setting
for users with Static IP Address assignment
Connection Ports on AlphaShield:
PC Port:
It is used to connect the computer's high-speed connection or the
Router's WAN port.
AUX Port:
It is used to connect the VOIP and other similar devices that do not
require protection. It can also be used for testing purposes or for
bypassing AlphaShield's security features.
Cable/DSL Port:
It is used to connect the high speed Modem or the Router's LAN port.
Trouble Shooting:
My AlphaShield Professional Edition does not power up. Why?
Ensure that you are using the provided wall mount power adapter (9 volt DC. 200 mA
center positive) shipped with the AlphaShield Professional Edition and not some other
power adapter.
Make sure that there is 110 volts AC or 220 volts AC being provided through the wall
outlet (In North America 110 VAC).
If all of the above is correct, then the provided adapter could be faulty.
The Inbound data link status LED does not come on when I connect my
AlphaShield Professional Edition to my cable or xDSL Modem. Why?
Make sure that power is being supplied to your cable or xDSL Modem and that it is
switched on. Make sure that the Network RJ-45 (Ethernet) cable is the same as that
provided by the Modem manufacturer or your ISP.
Page 10 of 19