Cinelex DESK-TX8 Manual de operação - Página 5

Procurar online ou descarregar pdf Manual de operação para Transmissor Cinelex DESK-TX8. Cinelex DESK-TX8 6 páginas. Wireless dmx transmitter

To move between pages press the Up and Down (Blue) buttons. The new page no. will be displayed.

To activate a slider on a new page you must press the flash (Green) button beneath the slider

Once you move to a new page, using the address up or down buttons, all sliders become inactive

until you press the corresponding flash button.

To power off press the Power button.

The display will show "Str" which means its stores all the page values into internal memory.

Once stored the display will then show "off" you then press the OFF button.

The DESK-TX8 will remain in the PAGES (Extended) mode even after the power is turned off and

back on, unless it is manually put back into Standard (Basic) Mode.

All DMX values are retained in memory so when you power up again it will remember the settings

from previously.

To CLEAR / RESET

To clear the memory and/or return to basic mode

Power off the desk as usual

2. Press and hold flash buttons 7 and 8 then press power on.

3. The display will show "Clr" this means the memory is being wiped and the desk will return to

Standard mode operation (Display will show 001). DESK can now be used as normal is

Standard Mode.

4. To return to PAGES mode, power off the DESK-TX8 again, and the Power on while holding

down the blue DOWN button.

5 |

P a g e