Cineo Edge 160 Manual do utilizador - Página 9

Procurar online ou descarregar pdf Manual do utilizador para Luminária Cineo Edge 160. Cineo Edge 160 16 páginas.

Adjusting DMX starting Address

With LOCAL control enabled, when the display is showing the DMX Address, pressing the UP or DOWN

buttons changes the starting address for DMX. You must press the ENTER button within 20 seconds in

order to keep the new DMX address; otherwise it will revert to the previous address. The example to the

right shows the display for Address 001.

Adjusting the DMX Personality

With LOCAL control enabled, when the display is showing DMX Personality, for example "HSIC08", it

reflects the DMX Personality currently set. It can be modified using the UP and DOWN buttons followed

by ENTER. The 4 personality options are: HSIC16, HSIC08, RGBC16, RGBC08.

In HSIC personality, the following four DMX slots are (in sequence): Intensity, CCT, Saturation and Hue,

and can be operated in 8-bit or 16-bit DMX resolution.

In RGBC personality, the following four DMX slots are (in sequence): Red, Green, Blue and CCT. Select 8-bit

or 16-bit resolution.

You must press the ENTER button within 20 seconds in order to keep the new DMX address; otherwise it

will revert to the previous address.

Note that 16-bit resolution personalities are selected, the LOCAL controls also operate at the higher

resolution.

Adjusting DMX Slot 1

This shows the first DMX slot value based on the current personality setting. The control console can

change the value of this channel using the UP/DOWN buttons, and results are reflected on the output of

the fixture. . No "ENTER" is required for the new value to take effect.

If the unit is in either 8-bit or 16-bit HSIC personalities, this slot adjusts Intensity, or overall output, 0-100%.

If the unit is in either RGBC personalities, this slot adjusts the value of the Red channel, 0-100%

Adjusting DMX Slot 2

This shows the second DMX slot value based on the current personality setting. The control console can

change the value of this channel using the UP/DOWN buttons, and results are reflected on the output of

the fixture. No "ENTER" is required for the new value to take effect.

If the unit is in either 8-bit or 16-bit HSIC personalities, this slot adjusts CCT, in values from 2700 to 6500K.

If the unit is in either RGBC personalities, this slot adjusts the value of the Green channel, 0-100%.