AccuPower AccuManager AP 2020 Manual de Instruções - Página 9

Procurar online ou descarregar pdf Manual de Instruções para Carregador de bateria AccuPower AccuManager AP 2020. AccuPower AccuManager AP 2020 14 páginas.

Imprimir página

Congratulations for the purchase of the AccuManager20 Battery

Charger! This new Super-Fast-Charger enables the recharging of

rechargeable Nickel-Cadmium / Nickel-Metal-Hydride and RAM™

(Rechargeable-Alkaline-Managanese) batteries in one unit at the

same time. One to four AAA, AA, C, D and two 9V batteries can be

charged in any combination of sizes and battery chemistry. The

AccuManager20 automatically recognizes the battery type. The main

technical feature is two proprietary micro-controllers that regulate and

monitor the most important battery characteristics during the

recharging process.

Recharging of Nickel-Metal-Hydride,

Nickel-Cadmium and RAM™batteries:

As soon as the AccuManager20 is powered and the rechargeable

batteries are placed in the compartments, the charging process is

automatically triggered. Then communication between the batteries

and the charger starts. Initially, the LED's are on for 3 seconds (Battery

Diagnosis). During this time, the main battery parameters are

recorded. The appropriate charging algorithm for each battery

chemistry is defined. After this initiation phase, the LED'S begin to

blink, indicating that the charging process has started.

The end of the charging process is reached when the corresponding

LED is constantly on.

The charging times in hours:

NiCd/NiMH

RAM™

(z.B. AccuCell)

(The charging times depending on amount, capacity and quality)

AAA/Micro AA/Mignon

0,4 - 3,5

0,2 - 2,0

0,5 - 5,0

0,5 - 4,0

C / Baby D / Mono 9 Volt/6F22

1,0 - 6,0

1,0 - 12

1,5 - 8,0

1,5 - 14

9,0