ARC R11-W Manual - Página 5

Procurar online ou descarregar pdf Manual para Carro de brincar motorizado ARC R11-W. ARC R11-W 9 páginas.

Imprimir página
When assembling the front and rear arms, please pay
attention to these notches for correct orientation.
32mm 27.6mm
27.6mm
32mm
Initial Setup
33mm 28.6mm
28.6mm 33mm
Front lower arms have 4 different shock positions.
Make sure left and right sides are both symmetrical
during assembly.
R10107A
Ball Joint 4.9mm open (6)
R10107C
Anti-Roll Bar Joint (4)
R103017
4.9mm Ball End Med (4)
R103008
Ball 5mm (4)
R10110A
R103040
Pivot Pin Inner (2)
R10110F
Low Arm F Set with Shims
R112063
R11W Suspension Block #1
R105404
Plastic Shims
(1mm)
R105203
3x6mm Flat Screw (10)
R105403
R105403
3x8mm Set Screw (10)
R105404
3x10mm Set Screw (10)
R105403
Plastic Shims
(1mm)
BAG 04
35.1mm
35.1mm
39.5mm
30.7mm
30.7mm
39.5mm
Initial Setup
40.5mm 31.7mm
31.7mm 40.5mm
36.1mm
36.1mm
Rear lower arms have 6 different positions for shocks and anti-roll bars.
Make sure left and right sides are symmetrical during assembly.
BAG 04
29.1mm
29.1mm
R105404
Use Default Setup 27.6mm Offset Hole
09
R10107A
Ball Joint 4.9mm open (6)
R103017
4.9mm Ball End Med (4)
R103017
R103011
4.9mm Ball End Short (4)
R103008
Ball 5mm (4)
R10110A
R103011
R103040
Pivot Pin Inner-Short (2)
(Middle Hole)
R105403
R10110R
Low Arm R Set with Shims
R112062
R11W Suspension Block #3
Plastic Shims
(1mm)
R105203
R105404
3x6mm Flat Screw (10)
Plastic Shims
(1mm)
R105403
3x8mm Set Screw (10)
R105404
3x10mm Set Screw (10)
R105403
R107001
CDV G-Clip (8)
R103002
Wheel Axle (2)
R103111
R10W Spring Steel Drive Shaft (2)
R103005
CVD Insert (2)
R102005
Hex Wheel Hub Alu (2)
R101090
Steering Block and Upright
R106101
Ø2x9.8mm Pin (10)
R106102
Ø2x10mm Pin (10)
R105101
2x5mm Cap Screw (10)
R106012
5x10x4mm Ball Bearing (4)
R105404
(Middle Hole)
Use Default Setup 35.1mm Offset Hole
R106102
3
4
Apply Grease
GE
2
1
GE
10
BAG 04
BAG 05
R106101
R106101